I backup PPDM SD per PowerMax hanno esito negativo se l'engine di protezione non è collegato all'array di storage
Summary: I backup PPDM SD per PowerMax hanno esito negativo se l'engine di protezione PPDM non è collegato all'array di storage
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Il backup di PPDM Storage Direct ha esito negativo con il seguente errore nel sdmng.log
Array ID: ########-####-####-####-############. Mininum capacity needed 8, capacity in-use or
commited: 0, capacity available: 0Cause
Il proxy del motore di protezione PPDM non è collegato all'array di storage
Resolution
Eseguire un rilevamento esplicito dell'array di storage dall'interfaccia utente di PPDM.
Testare nuovamente il backup PPDM Storage Direct.
Affected Products
Data Protection Suite SeriesArticle Properties
Article Number: 000311595
Article Type: Solution
Last Modified: 24 Apr 2025
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.