Dell Unity: CLI를 사용하여 ESRS 통합을 설정하는 방법

Summary: 다음은 Unity 어레이에서 CLI를 사용하여 ESRS 통합을 활성화하기 위해 수행할 수 있는 단계입니다. (사용자 수정 가능)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

이 KB는 CLI를 사용하여 Unity 어레이에서 ESRS Integrated를 구성하고 프로비저닝하는 데 필요한 단계를 안내하기 위한 것입니다.

1단계: 연락처 정보
설정다음 명령을 사용하여 연락처 정보를 표시하고 설정합니다.

uemcli -u local/admin -securepassword /sys/info show
uemcli -u local/admin -securepassword /sys/info set -contactFirstName <First> -contactLastName <Last> -contactEmail <Email> -contactPhone <Phone#>

2단계: EMC 온라인 지원 계정을 확인합니다.
다음 명령은 Unity 어레이를 등록하는 데 사용되는 EMC 온라인 지원 계정을 표시하고 설정하는 데 사용됩니다.

uemcli -u local/admin -securepassword /sys/support/account show
uemcli -u local/admin -securepassword /sys/support/account set -user <EMC Online Support account> -passwdSecure <pass>

3단계: EULA를 확인합니다.
다음 명령을 사용하여 EULA 라이선스를 표시하고 수락합니다.

uemcli -u local/admin -securepassword /sys/support/esrsi show
uemcli -u local/admin -securepassword /sys/support/esrsi set -acceptEula yes   (***If not already accepted***)

4단계: ESRS에 대해 networkCheck를 실행합니다.

uemcli -u local/admin -securepassword /sys/support/esrsi checkNetwork

5단계: AccessCode
요청다음 명령은 support.emc.com 에서 AccessCode를 요청하는 데 사용됩니다. 이 액세스 코드는 2단계에서 지정한 EMC 온라인 지원 계정 이메일로 전송됩니다.

uemcli -u local/admin -securepassword /sys/support/esrsi requestAccessCode

6단계: 사이트 정보를 봅니다.
다음 명령은 계정이 액세스할 수 있는 하나 이상의 사이트를 보고 확인하는 데 사용됩니다.

uemcli -u local/admin -securepassword /sys/support/esrsi/site show -accessCode <code> -detail

7단계: SiteId에서 ESRS를 활성화합니다.
다음 명령은 6단계의 사이트 ID를 사용하여 어레이에 대해 ESRS를 활성화할 수 있는 마지막 단계입니다. 6단계에서 여러 사이트가 반환되는 경우 올바른 사이트를 지정했는지 확인합니다.

uemcli -u local/admin -securepassword /sys/support/esrsi set -enable yes -siteId <siteid>

CLI의 명령 출력

 13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Contact first name    =
      Contact last name     =
      Contact company       =
      Contact email address =
      Contact phone number  =
      Location name         =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info set -contactFirstName John -contactLastName Doe -contactEmail Globe@myCompany.com -contactPhone 1234567890

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Support user name =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account set -user Globe@myCompany.com -passwdSecure

Password:
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Enabled       = no
      EULA accepted = no

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -acceptEula yes

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:00:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi checkNetwork

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:14:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi requestAccessCode

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Recipient email address =  G*****@myCompany.com.

Operation completed successfully.

21:15:22 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi/site show -accessCode 123456 -detail

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Site ID          = 123456
      Party ID         = 987654321
      Site name        = My Company
      Site description =
      Address          = 123 My Address
      State            = MA
      Country          = US
      Country name     =
      City             = Hopkinton
      Current location = yes

21:20:46 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -enable yes -siteId 123456

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

 

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F , Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid ...
Article Properties
Article Number: 000022686
Article Type: How To
Last Modified: 27 Nov 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.