Dell Unity: Cómo configurar ESRS Integrated mediante la CLI

Summary: Los siguientes son los pasos que se pueden realizar para habilitar ESRS integrado mediante la CLI en un arreglo Unity. (Corregible por el usuario)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

El objetivo de esta base de conocimientos es guiar los pasos necesarios para configurar y aprovisionar ESRS integrado en un arreglo Unity mediante la CLI.

Paso 1: Establecer información
de contactoEl siguiente comando se utiliza para mostrar y establecer la información de contacto.

uemcli -u local/admin -securepassword /sys/info show
uemcli -u local/admin -securepassword /sys/info set -contactFirstName <First> -contactLastName <Last> -contactEmail <Email> -contactPhone <Phone#>

Paso 2: Verifique la cuenta del servicio de soporte en línea de EMC.
Los siguientes comandos se utilizan para mostrar y configurar la cuenta de soporte en línea de EMC que se utiliza para registrar el arreglo Unity.

uemcli -u local/admin -securepassword /sys/support/account show
uemcli -u local/admin -securepassword /sys/support/account set -user <EMC Online Support account> -passwdSecure <pass>

Paso 3: Compruebe el EULA.
Los siguientes comandos se utilizan para mostrar y aceptar la licencia EULA.

uemcli -u local/admin -securepassword /sys/support/esrsi show
uemcli -u local/admin -securepassword /sys/support/esrsi set -acceptEula yes   (***If not already accepted***)

Paso 4: Ejecute networkCheck para ESRS.

uemcli -u local/admin -securepassword /sys/support/esrsi checkNetwork

Paso 5: solicitar el código
de accesoEl siguiente comando se utiliza para solicitar un código de acceso de support.emc.com. Este código de acceso se envía al correo electrónico de la cuenta de soporte en línea de EMC especificado en el paso 2.

uemcli -u local/admin -securepassword /sys/support/esrsi requestAccessCode

Paso 6: Ver la información del sitio.
El siguiente comando se utiliza para ver y verificar uno o más sitios a los que tiene acceso su cuenta.

uemcli -u local/admin -securepassword /sys/support/esrsi/site show -accessCode <code> -detail

Paso 7: Habilite ESRS en SiteId.
El siguiente comando es el último paso en el que puede habilitar ESRS para el arreglo mediante el ID de sitio del paso 6. Si se devuelven varios sitios en el paso 6, asegúrese de especificar el sitio correcto.

uemcli -u local/admin -securepassword /sys/support/esrsi set -enable yes -siteId <siteid>

Salidas de comandos de la CLI

 13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Contact first name    =
      Contact last name     =
      Contact company       =
      Contact email address =
      Contact phone number  =
      Location name         =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info set -contactFirstName John -contactLastName Doe -contactEmail Globe@myCompany.com -contactPhone 1234567890

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Support user name =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account set -user Globe@myCompany.com -passwdSecure

Password:
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Enabled       = no
      EULA accepted = no

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -acceptEula yes

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:00:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi checkNetwork

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:14:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi requestAccessCode

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Recipient email address =  G*****@myCompany.com.

Operation completed successfully.

21:15:22 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi/site show -accessCode 123456 -detail

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Site ID          = 123456
      Party ID         = 987654321
      Site name        = My Company
      Site description =
      Address          = 123 My Address
      State            = MA
      Country          = US
      Country name     =
      City             = Hopkinton
      Current location = yes

21:20:46 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -enable yes -siteId 123456

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

 

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F , Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid ...
Article Properties
Article Number: 000022686
Article Type: How To
Last Modified: 27 Nov 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.