Dell Unity: ESRS Integrated instellen met CLI

Summary: Hieronder volgen de stappen die kunnen worden genomen om ESRS Integrated in te schakelen met behulp van CLI op een Unity-array. (Op te lossen door gebruiker)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Dit KB-artikel is bedoeld om de stappen te doorlopen die nodig zijn voor het configureren en inrichten van ESRS Integrated on a Unity array met behulp van CLI.

Stap 1: Contactgegevens
instellenDe volgende opdracht wordt gebruikt om de contactgegevens weer te geven en in te stellen.

uemcli -u local/admin -securepassword /sys/info show
uemcli -u local/admin -securepassword /sys/info set -contactFirstName <First> -contactLastName <Last> -contactEmail <Email> -contactPhone <Phone#>

Stap 2: Controleer het EMC Online Support account.
De volgende opdrachten worden gebruikt om het EMC Online Support Account weer te geven en in te stellen dat wordt gebruikt om de Unity array te registreren.

uemcli -u local/admin -securepassword /sys/support/account show
uemcli -u local/admin -securepassword /sys/support/account set -user <EMC Online Support account> -passwdSecure <pass>

Stap 3: Controleer de EULA.
De volgende opdrachten worden gebruikt om de EULA-licentie weer te geven en te accepteren.

uemcli -u local/admin -securepassword /sys/support/esrsi show
uemcli -u local/admin -securepassword /sys/support/esrsi set -acceptEula yes   (***If not already accepted***)

Stap 4: Voer de networkCheck for ESRS uit.

uemcli -u local/admin -securepassword /sys/support/esrsi checkNetwork

Stap 5: vraag AccessCode
aanDe volgende opdracht wordt gebruikt om een toegangscode aan te vragen bij support.emc.com. Deze toegangscode wordt verzonden naar het e-mailadres van het EMC Online Support Account dat is opgegeven in stap 2.

uemcli -u local/admin -securepassword /sys/support/esrsi requestAccessCode

Stap 6: Bekijk de site-informatie.
De volgende opdracht wordt gebruikt om een of meer sites weer te geven en te verifiëren waartoe uw account toegang heeft.

uemcli -u local/admin -securepassword /sys/support/esrsi/site show -accessCode <code> -detail

Stap 7: Schakel ESRS in op SiteId.
De volgende opdracht is de laatste stap waarin u ESRS voor de array kunt inschakelen met behulp van de site-ID van stap 6. Als er meerdere sites worden geretourneerd in stap 6, moet u ervoor zorgen dat de juiste site wordt opgegeven.

uemcli -u local/admin -securepassword /sys/support/esrsi set -enable yes -siteId <siteid>

Opdrachtuitvoer vanuit CLI

 13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Contact first name    =
      Contact last name     =
      Contact company       =
      Contact email address =
      Contact phone number  =
      Location name         =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info set -contactFirstName John -contactLastName Doe -contactEmail Globe@myCompany.com -contactPhone 1234567890

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Support user name =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account set -user Globe@myCompany.com -passwdSecure

Password:
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Enabled       = no
      EULA accepted = no

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -acceptEula yes

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:00:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi checkNetwork

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:14:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi requestAccessCode

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Recipient email address =  G*****@myCompany.com.

Operation completed successfully.

21:15:22 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi/site show -accessCode 123456 -detail

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Site ID          = 123456
      Party ID         = 987654321
      Site name        = My Company
      Site description =
      Address          = 123 My Address
      State            = MA
      Country          = US
      Country name     =
      City             = Hopkinton
      Current location = yes

21:20:46 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -enable yes -siteId 123456

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

 

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F , Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid ...
Article Properties
Article Number: 000022686
Article Type: How To
Last Modified: 27 Nov 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.