Dell Unity: Sådan opsætter du ESRS integreret ved hjælp af CLI

Summary: Følgende er de trin, der kan udføres for at aktivere ESRS integreret ved hjælp af CLI på et Unity-system. (Kan rettes af brugeren)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Denne KB er beregnet til at gennemgå de trin, der er nødvendige for at konfigurere og klargøre ESRS integreret på et Unity-system ved hjælp af CLI.

Trin 1: Angiv kontaktoplysninger
Følgende kommando bruges til at vise og indstille kontaktoplysningerne.

uemcli -u local/admin -securepassword /sys/info show
uemcli -u local/admin -securepassword /sys/info set -contactFirstName <First> -contactLastName <Last> -contactEmail <Email> -contactPhone <Phone#>

Trin 2: Bekræft EMC Online Support-kontoen.
Følgende kommandoer bruges til at vise og indstille den EMC Online Support-konto, der bruges til at registrere Unity-systemet.

uemcli -u local/admin -securepassword /sys/support/account show
uemcli -u local/admin -securepassword /sys/support/account set -user <EMC Online Support account> -passwdSecure <pass>

Trin 3: Tjek slutbrugerlicensaftalen.
Følgende kommandoer bruges til at vise og acceptere EULA-licensen.

uemcli -u local/admin -securepassword /sys/support/esrsi show
uemcli -u local/admin -securepassword /sys/support/esrsi set -acceptEula yes   (***If not already accepted***)

Trin 4: Kør networkCheck for ESRS.

uemcli -u local/admin -securepassword /sys/support/esrsi checkNetwork

Trin 5: Anmod om adgangskode
Følgende kommando bruges til at anmode om en adgangskode fra support.emc.com. Denne adgangskode sendes til e-mailen for EMC Online Support-kontoen, der er angivet i trin 2.

uemcli -u local/admin -securepassword /sys/support/esrsi requestAccessCode

Trin 6: Få vist webstedets oplysninger.
Følgende kommando bruges til at få vist og bekræfte et eller flere websites, som din konto har adgang til.

uemcli -u local/admin -securepassword /sys/support/esrsi/site show -accessCode <code> -detail

Trin 7: Aktivér ESRS på SiteId.
Følgende kommando er det sidste trin, hvor du kan aktivere ESRS for systemet ved hjælp af websteds-id'et fra trin 6. Hvis der returneres flere lokaliteter i trin 6, skal du sikre dig, at den korrekte lokalitet er angivet.

uemcli -u local/admin -securepassword /sys/support/esrsi set -enable yes -siteId <siteid>

Kommandoudgange fra CLI

 13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Contact first name    =
      Contact last name     =
      Contact company       =
      Contact email address =
      Contact phone number  =
      Location name         =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info set -contactFirstName John -contactLastName Doe -contactEmail Globe@myCompany.com -contactPhone 1234567890

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Support user name =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account set -user Globe@myCompany.com -passwdSecure

Password:
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Enabled       = no
      EULA accepted = no

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -acceptEula yes

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:00:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi checkNetwork

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:14:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi requestAccessCode

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Recipient email address =  G*****@myCompany.com.

Operation completed successfully.

21:15:22 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi/site show -accessCode 123456 -detail

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Site ID          = 123456
      Party ID         = 987654321
      Site name        = My Company
      Site description =
      Address          = 123 My Address
      State            = MA
      Country          = US
      Country name     =
      City             = Hopkinton
      Current location = yes

21:20:46 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -enable yes -siteId 123456

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

 

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F , Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid ...
Article Properties
Article Number: 000022686
Article Type: How To
Last Modified: 27 Nov 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.