PowerEdge: M1000e - Hoe kan ik de wijzigingsmodi voor stroomredundantie via CMC controleren?
Summary: Dit artikel bevat de methode voor het controleren en wijzigen van de stroomredundantiemodi van M1000e met behulp van de CMC-webinterface.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
- Meld u aan bij de CMC-webinterface.
- Kies "Chassis" en klik op "Power Management".
- Klik op "Configuration" en "Budget/Redundancy Configuration" wordt weergegeven. Controleer en wijzig hier de stroomredundantiemodus.
Voor meer uitleg over de stroomredundantiemodi van de PowerEdge M1000e, raadpleegt u Dell M1000e Blade Power Distribution Systemsere.
Notitie:
1. Er zijn drie verschillende stroomredundantiemodi: Wisselstroomredundantie, redundantie van de voeding, niet-redundant Zie voor meer informatie hierover Dell M1000e blade-voedingsdistributiesystemen
2.To deze functie gebruikt, zijn beheerdersrechten vereist voor het chassis.
1. Er zijn drie verschillende stroomredundantiemodi: Wisselstroomredundantie, redundantie van de voeding, niet-redundant Zie voor meer informatie hierover Dell M1000e blade-voedingsdistributiesystemen
2.To deze functie gebruikt, zijn beheerdersrechten vereist voor het chassis.
Affected Products
Dell Chassis Management Controller Version 6.21 For Dell PowerEdge M1000e, PowerEdge M1000EArticle Properties
Article Number: 000135717
Article Type: How To
Last Modified: 15 Apr 2025
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.