GDDR: z/OS 2.5로 업그레이드하면 이상 종료 및 GDDR 제어 시스템이 성능 저하 모드로 실행됨
Summary: z/OS 2.5로 업그레이드하면 GDDR(Geographically Dispersed Disaster Restart)에서 이상 종료가 발생하고 GDDR 제어 시스템(C-SYS)이 성능 저하 모드로 실행됩니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
메인프레임 운영 소프트웨어는 유지 보수 허용 오차가 있는 z/OS 2.5 소프트웨어 레벨로 업데이트됩니다. z/OS 2.5는 새로운 IBM z16 CPU에 사용됩니다.
GDDR GDDRMAIN은 z/OS 유지보수가 적용된 후 여러 ABEND로 시작되었습니다.
- HBM은 GDDRMAIN 시작 시 GDDR 호스트가 성능 저하 모드에 있는 아래 오류를 보고합니다.
ABEND S0E0-29
- GDDRRPT는 GDDRMAIN 종료 시 아래 오류를 보고합니다.
ABEND S0E0-28
GDDR 이벤트 모니터(EVM) 및 하트비트 모니터(HBM) 출력에 다음 오류 메시지가 게시됩니다.
GDDUG86E No matching GDDR systems found
만약 ABEND S0E0-28 GDDRMAIN 종료 시 발생하면, Abend S067-04 GDDRMAIN을 다시 불러오면 발생할 수 있습니다.
Cause
안
또한,
ABEND S0E0-29 GDDREVMI 모듈, 오프셋 0005AF74의 HBM 하위 작업에서 GDDRMAIN 시작 시 발생할 수 있습니다.
PSW 183158F0 0010D507 3000F154이로 인해 HBM 하위 작업이 종료되고 GDDRMAIN이 하트비트 모니터링 기능이 없는 상태로 남습니다. GDDR 호스트가 성능 저하 모드로 실행됩니다. GDDREVMI는 레지스터를 사용하기 전에 REGISTER AR15를 지우도록 업데이트되어
ABEND S0E0-29을 클릭합니다.
또한,
ABEND S0E0-28 GDDRMAIN, 오프셋 0006EAB2에서 GDDRMAIN 종료 시 GDDRRPT에서 발생할 수 있습니다.
PSW D24FD37A 1000D207 D37D5004GDDRRPT가 REGISTER AR1을 지우도록 업데이트되어
ABEND S0E0-28이라고 합니다. 데이터 공간 2 ALET(Access List Entry Token)가 유효한지 확인하도록 GDDRMAIN이 업데이트됩니다. 이 작업은 다른 GDDR 인스턴스의 데이터 공간에 액세스하기 전에 수행됩니다. 이 작업을 통해 Abend S067-04 다른 GDDR 인스턴스가 완전히 종료되지 않아 GDDRMAIN 시작에서.Resolution
해결 방법:
- ABEND S0E0-29의 경우 없음이지만 GDDR 호스트는 성능 저하 모드에서 계속 실행됩니다.
- LPAR(Logical Partition)의 초기 프로그램 로드(IPL)는
Abend S067-04발생.
영구 수정:
- GDDR 6.0의 경우 Dell 지원에서 PTF(Program Temporary Fix) GD60004 및 GD60005 다운로드할 수 있습니다.
- GDDR 6.1의 경우 이 문제는 기본 제품에서 해결되었습니다. Dell Support에서 다운로드할 수 있습니다.
Additional Information
PTF(Program Temporary Fix) 설명 -
++PTF(GD60004) REWORK(2022315) .
++VER(Z038) FMID(GDDR600)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3459
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: Warning message GDDUG24W results in
* RC 8 on pre-script and post-script
* configuration displays
*
* DESCRIPTION DETAIL:
*
* During GDDR scripts, warning message GDDUG24W could result
* in an RC 8 on the pre-script and post-script configuration
* displays, for example:
*
* GDDUG24W 2 external RDF groups indicate SRDF/A active
* GDDR639I GDDR Completed pre-script configuration display
* with rc 8
*
* This is simply a messaging issue, as a non-zero RC on the
* configuration displays does not affect the outcome of the
* script.
*
* PROBLEM RESOLUTION:
*
* Warning message GDDUG24W will now result in an RC 4 on the
* configuration displays, as expected.
*
* MODULES: GDDRMCMD
*
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3460 GDDR-3472
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: ABENDS067-04 upon GDDRMAIN startup due
* to another GDDR instance not shutting
* down cleanly
*
* DESCRIPTION DETAIL:
*
* An S067-04 abend could occur upon GDDRMAIN startup at
* GDDRMAIN offset 000006AC (data at PSW 4038B219 02009540
* 50E8B219) if another GDDR instance was not shut down
* cleanly. This causes GDDRMAIN to terminate.
*
* PROBLEM RESOLUTION:
*
* An S067-04 abend should no longer occur upon GDDRMAIN
* startup if another GDDR instance was not shut down cleanly.
*
* In addition, the GDDRMAIN ESTAE routine has been improved to
* ensure that GDDRMAIN is shut down cleanly in case of an
* abend.
*
* MODULES: GDDRMAIN
* GDDRMCMD
*
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3499
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: New PRIMARY command to display primary
* C-system name
*
* DESCRIPTION DETAIL:
*
* A new command is needed to display the primary C-system name
* from any system in the GDDR-plex, including managed systems.
*
* PROBLEM RESOLUTION:
*
* A new PRIMARY command has been created to display the
* primary C-system name from the point-of-view of one or more
* C-systems. By default, the point-of-view from all C-systems
* is shown. The SYSTEM parameter may be used to narrow the
* scope to the specified C-system, and the SITE parameter may
* be used to narrow the scope to the C-system at the specified
* site. This command may be issued from any system where
* GDDRMAIN is active, including managed systems. It can be
* issued as a GDDRMAIN modify command (e.g., F GDDRMAIN,PRI),
* as a Perform Health Check panel primary command (e.g., PRI),
* or using the GDDRMCMD batch interface (see GDDRMCMD in
* SAMPLIB).
*
* Syntax:
*
* PRImary
* [,SITE={DC1|DC2|DC3|DC4}]
* [,SYStem={<system_name>|LoCaL|ALL}]
* [,TiMeOut=<seconds>]
* [,CONsole[={Yes|No}]]
* [,SysMSG[={Yes|No}]]
* [,SysPRinT[={Yes|No}]]
* [,DeBuG[={Yes|No}]]
*
* Example:
*
* GDDUC04I Primary C-system as seen from the indicated
* site/system
* ---------------------------------------------------------
* Site System Value
* ---- -------- -----------------------------------------
* DC1 N247 N247
* DC2 X99 N247
* DC3 X98 N247
* ---------------------------------------------------------
*
* MODULES: GDDRMCMD
* GDDRMCON
*
* ------------------------------------------------------------
++PTF(GD60005) REWORK(2023012) .
++VER(Z038) FMID(GDDR600)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
*
* PROBLEM FIXED: GDDR-3463 GDDR-3465
* USERS AFFECTED: GDDR users
* PROBLEM DESCRIPTION: ABENDS0E0-29 upon GDDRMAIN startup or
* ABENDS0E0-28 upon GDDRMAIN shutdown
*
* DESCRIPTION DETAIL:
*
* An S0E0-29 abend could occur upon GDDRMAIN startup in the
* HBM (heartbeat monitor) subtask at GDDREVMI offset 0005AF74
* (data at PSW 183158F0 0010D507 3000F154). This causes the
* HBM subtask to terminate and leaves GDDRMAIN without
* heartbeat monitoring capabilities.
*
* In addition, an S0E0-28 abend could occur in GDDRRPT upon
* GDDRMAIN shutdown at GDDRMAIN offset 0006EAB2 (data at PSW
* D24FD37A 1000D207 D37D5004).
*
* PROBLEM RESOLUTION:
*
* An S0E0 abend should no longer occur upon GDDRMAIN startup
* in GDDREVMI or upon GDDRMAIN shutdown in GDDRRPT.
*
* MODULES: GDDREVMI
* GDDRRPT
Affected Products
Geographically Dispersed Disaster Restart (GDDR)Article Properties
Article Number: 000203766
Article Type: Solution
Last Modified: 07 Aug 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.