Dell EMC Unity: So überprüfen Sie die Gesamtgröße des Unity-Systemspeichers

Summary: Dell EMC Unity: So überprüfen Sie die Gesamtgröße des Unity-Systemspeichers.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Um den Systemspeicher auf einem Unity-Storage-Array anzuzeigen, kann der folgende UEMCLI-Befehl verwendet werden:

 

1. Melden Sie sich bei einer PuTTY-Sitzung mit der Unity-IP-Adresse, dem Servicenutzer und dem Kennwort an.

 

2. Führen Sie den folgenden Befehl aus:  uemcli -d x.x.x.x -u <username> -p <password> /env/sp show  -detail

 

3. Der Systemspeicher ist neben dem Etikett "Memory Size" zu sehen. 

 

uemcli -d x.x.x.x -u <username> -p <password> /env/sp show -detail
Storage system address: x.x.x.x
Storage system port: 443
HTTPS connection
 
 
1:    ID             = spa
      DPE            = dpe
      Slot           = 0
      Name           = SP A
      Mode           = Normal
      Health state   = OK (5)
      Health details = "The component is operating normally. No action is required."
      Model          = BOLERO SP W/O PLUG W/ NAV M2
      Part number    = xxx-xxx-xxx-xx
      Serial number  = xxxxxxxxxxx
      Memory size    = 206158430208 (192.0G)  <<<<<<<

 

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 400, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 600, Dell EMC Unity 650F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family
Article Properties
Article Number: 000019018
Article Type: How To
Last Modified: 27 Mar 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.