Dell EMC Unity: Cómo comprobar el tamaño total de la memoria del sistema Unity

Summary: Dell EMC Unity: Cómo comprobar el tamaño total de la memoria del sistema Unity.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Para ver la memoria del sistema en un arreglo de almacenamiento Unity, se puede utilizar el siguiente comando de UEMCLI:

 

1. Inicie sesión en PuTTY con la IP y el usuario y la contraseña del servicio de Unity.

 

2. Ejecute el siguiente comando:  uemcli -d x.x.x.x -u <username> -p <password> /env/sp show  -detail

 

3. La memoria del sistema se puede ver junto a la etiqueta "Tamaño de memoria". 

 

uemcli -d x.x.x.x -u <username> -p <password> /env/sp show -detail
Storage system address: x.x.x.x
Storage system port: 443
HTTPS connection
 
 
1:    ID             = spa
      DPE            = dpe
      Slot           = 0
      Name           = SP A
      Mode           = Normal
      Health state   = OK (5)
      Health details = "The component is operating normally. No action is required."
      Model          = BOLERO SP W/O PLUG W/ NAV M2
      Part number    = xxx-xxx-xxx-xx
      Serial number  = xxxxxxxxxxx
      Memory size    = 206158430208 (192.0G)  <<<<<<<

 

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 400, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 600, Dell EMC Unity 650F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family
Article Properties
Article Number: 000019018
Article Type: How To
Last Modified: 27 Mar 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.