Dell EMC Unity: Slik kontrollerer du den totale størrelsen på Unity-systemminnet

Summary: Dell EMC Unity: Slik kontrollerer du total størrelse på Unity-systemminnet.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Hvis du vil vise systemminnet på et Unity-lagringsarray, kan følgende UEMCLI-kommando brukes:

 

1. Logg på en PuTTY-økt med Unity IP og bruker og passord.

 

2. Kjør følgende kommando:  uemcli -d x.x.x.x -u <username> -p <password> /env/sp show  -detail

 

3. Du finner systemminnet ved siden av "Memory Size"-taggen. 

 

uemcli -d x.x.x.x -u <username> -p <password> /env/sp show -detail
Storage system address: x.x.x.x
Storage system port: 443
HTTPS connection
 
 
1:    ID             = spa
      DPE            = dpe
      Slot           = 0
      Name           = SP A
      Mode           = Normal
      Health state   = OK (5)
      Health details = "The component is operating normally. No action is required."
      Model          = BOLERO SP W/O PLUG W/ NAV M2
      Part number    = xxx-xxx-xxx-xx
      Serial number  = xxxxxxxxxxx
      Memory size    = 206158430208 (192.0G)  <<<<<<<

 

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 400, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 600, Dell EMC Unity 650F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family
Article Properties
Article Number: 000019018
Article Type: How To
Last Modified: 27 Mar 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.