ECS：報告部分分配的磁碟;磁碟機已掛接，但未顯示在 UI 中

Summary: 在 Diskhealth 指令檔中報告擴充或更換部分分配的磁碟後，或是將磁碟機掛接至容器和光纖，但並未在 UI 中顯示掛接。這是因為 SSM 未將磁碟顯示為已指派給擁有者。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

ECS 磁碟部分分配的磁碟
ECS 磁碟沒有塊箱
ECS 磁碟已滿
1% ECS 磁碟不是 100% 已滿
ECS 磁碟未預先配置

要確認您是否有此問題：

命令：
# svc_disk list -capacity -a
範例：（「未知」中的截斷輸出磁碟是已更換或已擴充到的磁碟） 
ecs03:~ # svc_disk list -capacity -a     
(truncated output)
r1n3              /dev/sdh1    A06      e70c8956-edfe-461b-8863-5b6523a7a24a     380.00     55.00      325.00
r1n3              /dev/sdi1    A07      436d8761-1a24-48ca-84fe-51b023fd626d     380.00     56.62      323.38
r1n3              /dev/sdj1    A08      8b20a88c-5019-4a57-81b4-61de03ce358b     380.00     51.25      328.75
r1n3              /dev/sdk1    A09      fd24991a-051c-4167-88cc-e0c965588ab5     380.00     53.87      326.13
r1n3              /dev/sdm1    A10      e2b8f29e-3e41-4a7d-a491-4591b4e84063     Unknown    Unknown    Unknown
r1n3              /dev/sdn1    A11      c2b1eefb-b416-4aa6-8370-7301f4660fda     Unknown    Unknown    Unknown
r1n3              /dev/sdo1    B00      13d9e678-2b2f-492b-a0a5-f7a29911cccc     Unknown    Unknown    Unknown
r1n3              /dev/sdp1    B01      a8f69cd4-e446-484e-915b-48b9301af708     Unknown    Unknown    Unknown
r1n3              /dev/sdq1    B02      8abd06d2-932b-46b7-b889-25123268a25b     Unknown    Unknown    Unknown
r1n3              /dev/sdr1    B03      ecc79b91-26c7-49ad-9ecd-13fe4ccf5741     Unknown    Unknown    Unknown
r1n3              /dev/sds1    B04      6d1b1864-9182-4d70-a0a5-51d191d251db     Unknown    Unknown    Unknown
r1n3              /dev/sdt1    B05      77dbfa2f-8a4e-4c2a-af52-455340b31a82     Unknown    Unknown    Unknown
r1n3              /dev/sdu1    B06      c3600600-205c-4617-89b8-ddfae9028fbb     Unknown    Unknown    Unknown
r1n3              /dev/sdv1    B07      2662abb3-4ecd-4f76-a2b3-8fa4253e5118     Unknown    Unknown    Unknown
r1n3              /dev/sdw1    B08      4dd503cb-6090-4fae-9b41-d6ab0e7c9d6e     Unknown    Unknown    Unknown
r1n3              /dev/sdx1    B09      d3c3c0e4-fdfd-4534-ba99-35e354d2cef0     Unknown    Unknown    Unknown
r1n3              /dev/sdy1    B10      b74cf08a-ccc7-4e8b-b788-99b07163f68d     Unknown    Unknown    Unknown
r1n3              /dev/sdz1    B11      b8d95702-525d-470d-b595-3c2e98d4e1fb     Unknown    Unknown    Unknown
r1n4              /dev/sdaa1   C00      3184e585-db6c-4697-a6da-5c4abb78c2aa     380.00     2.50       377.50
r1n4              /dev/sdc1    A00      fee50f0d-cc91-44b4-a994-b1280482de71     380.00     46.37      333.63
r1n4              /dev/sdd1    A01      8c47ff29-f58b-4f8c-96b5-c6c79e28d49a     380.00     52.50      327.50
r1n4              /dev/sde1    A02      c2077176-e44f-4db9-999a-cfcd65eb7b81     380.00     49.37      330.63
r1n4              /dev/sdf1    A03      968b6a4e-bc73-42c9-9a92-f70f55209956     380.00     54.87      325.13
r1n4              /dev/sdg1    A05      43e18255-4a46-438f-bd73-d637df394dc8     380.00     47.75      332.25
(truncated output)

磁碟健全狀況 0.92 及更高版本也會回報此問題：
ECS：磁碟健全狀況指令檔 

   Checking for partially allocated disks. If problem found, see KB 504837

   There seems to be an issue with 192.168.219.8.
   /dev/sdt1                                                                                           7811938304      33152 7811905152   1% /dae/uuid-cada0901-dd4b-4045-9a23-a342b05b8a34
   /dev/sdp1                                                                                           7811938304      33152 7811905152   1% /dae/uuid-950b1859-319a-4ee7-93d8-d4e0604b8e6c
進一步確認新磁碟機已計入cs_hal、光纖和物件主容器中。（在此範例中，在每個節點上新增 5 後偵測到 15）命令：
viprexec -i "docker exec object-main df | grep -c uuid-"
範例：

### Checking the object-main container for mounted disk count
admin@ecs:~> viprexec -i "docker exec object-main df | grep -c uuid-"

Output from host : 192.168.219.1
15

Output from host : 192.168.219.2
15

Output from host : 192.168.219.3
15

Output from host : 192.168.219.4
15

Output from host : 192.168.219.5
15

Output from host : 192.168.219.6
15

命令：
viprexec -i "/opt/emc/caspian/fabric/cli/bin/fcli agent disk.disks | grep -cw MOUNTED"
範例：

### Checking the fabric agent for mounted disk count
admin@ecs:~> viprexec -i "/opt/emc/caspian/fabric/cli/bin/fcli agent disk.disks | grep -cw MOUNTED"

Output from host : 192.168.219.1
15

Output from host : 192.168.219.2
15

Output from host : 192.168.219.3
15

Output from host : 192.168.219.4
15

Output from host : 192.168.219.5
15

Output from host : 192.168.219.6
15
命令：
viprexec -i "cs_hal list disks | grep total"
範例：

### Checking cs_hal for disk count
admin@ecs:~> viprexec -i "cs_hal list disks | grep total"

Output from host : 192.168.219.1
total: 15

Output from host : 192.168.219.2
total: 15

Output from host : 192.168.219.3
total: 15

Output from host : 192.168.219.4
total: 15

Output from host : 192.168.219.5
total: 15

Output from host : 192.168.219.6
total: 15
在 SSM 查詢其中一個節點時，您會看到缺少新的磁碟 UUID。（在上述命令中應該會遺失svc_disk「未知」的項目）
令：
ssh 169.254.<rack number>.<node number> "/opt/emc/caspian/fabric/cli/bin/fcli agent node.id" | grep id
範例：

### Get device ID of impacted node
admin@ecs:~> ssh 192.168.219.6 "/opt/emc/caspian/fabric/cli/bin/fcli agent node.id" | grep id
  "id" : "515190ac-35a0-4557-80af-8bc9790449b4",
命令：
svc_dt search SS/1/SSTABLE_KEY -t PARTITION -k device=<id from above> | grep schema
範例：

### Query SSM of node6
admin@ecs:~> svc_dt search SS/1/SSTABLE_KEY -t PARTITION -k device=515190ac-35a0-4557-80af-8bc9790449b4 | grep schema
schemaType SSTABLE_KEY type PARTITION device 515190ac-35a0-4557-80af-8bc9790449b4 partition 19ffd192-1f8b-4b92-8da9-ade2521ef32c
schemaType SSTABLE_KEY type PARTITION device 515190ac-35a0-4557-80af-8bc9790449b4 partition 29f398dc-57a1-425c-aaa8-c4c47fe40384
schemaType SSTABLE_KEY type PARTITION device 515190ac-35a0-4557-80af-8bc9790449b4 partition 2caf424e-cd4e-4796-9c62-0c11301ad78a
schemaType SSTABLE_KEY type PARTITION device 515190ac-35a0-4557-80af-8bc9790449b4 partition 659dca69-7e96-49e2-9535-1b1fa1cc225d
schemaType SSTABLE_KEY type PARTITION device 515190ac-35a0-4557-80af-8bc9790449b4 partition 7eeb09e7-2d9b-4a2f-8fff-eafbbb949cc5
schemaType SSTABLE_KEY type PARTITION device 515190ac-35a0-4557-80af-8bc9790449b4 partition 9b9e62ec-598e-4b3e-b913-34d82070b526
schemaType SSTABLE_KEY type PARTITION device 515190ac-35a0-4557-80af-8bc9790449b4 partition aa0a9f6e-6ff2-47da-a131-c3832196230e
schemaType SSTABLE_KEY type PARTITION device 515190ac-35a0-4557-80af-8bc9790449b4 partition c1827e62-464f-47e9-8148-0fc5b42f1800
schemaType SSTABLE_KEY type PARTITION device 515190ac-35a0-4557-80af-8bc9790449b4 partition ca18a993-0f82-4978-b377-e40fa3bbe97b
schemaType SSTABLE_KEY type PARTITION device 515190ac-35a0-4557-80af-8bc9790449b4 partition db362f53-6740-45cb-9403-cc930497bc60

Cause

次要代碼問題。確認 SSM 的計數與物件主掛載磁碟、光纖掛載磁碟和cs_hal總數不同，請轉到解決方法部分。

Resolution

請聯絡 ECS 支援，並在開立服務要求時參閱此 KB 以尋求進一步協助。

Affected Products

ECS Appliance

Products

ECS Appliance Hardware Gen3 EX5000, ECS Appliance, ECS Appliance Gen 1, ECS Appliance Gen 2, ECS Appliance Gen 3, ECS Appliance Hardware Gen3 EX300, ECS Appliance Hardware Gen3 EX3000, ECS Appliance Hardware Gen1 U-Series , ECS Appliance Hardware Gen1 C-Series, ECS Appliance Hardware Gen2 C-Series, ECS Appliance Hardware Gen2 D-Series, ECS Appliance Hardware Gen2 U-Series, ECS Appliance Hardware Gen3 EX500, ECS Appliance Hardware Gen3 EXF900, ECS Appliance Hardware Series, ECS Appliance Software with Encryption, ECS Appliance Software without Encryption, Elastic Cloud Storage ...
Article Properties
Article Number: 000026542
Article Type: Solution
Last Modified: 08 Sept 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.