NetWorker vProxy: Failed to initialize Block Reader- ja Failed to open source VMDK -virheet

Summary: NetWorker VMware Protection (NVP) -integrointi on määritetty vProxy-laitteen kanssa. Kun vProxy suorittaa varmuuskopiointia, se ei voi avata virtuaalikoneen VMDK-lähdetiedostoa hotadd-tilassa. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

NetWorker VMware Protection (NVP) -integrointi on määritetty vProxy-laitteen kanssa. Virtuaalikoneen varmuuskopiot eivät voi ajoittain avata virtuaalikoneen VMDK-lähdetiedostoa hotadd-tilassa. Ajoitettu VMware Protection -työnkulun suoritus vaikuttaa eri VM:iin jokaisen suorituksen aikana.

vProxy-varmuuskopioinnin istuntolokissa näkyy: 
YYYY-MM-DDTHH:MM:SS INFO:   [@(#) Build number: 66] Data Mover: Hard disk 1: Preparing for data movement.
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Data Mover: Hard disk 1: VDDK: Failed to open source VMDK "[Datastore] VM_name/VM_name-000002.vmdk": VDDK Error: 13: You do not have access rights to this file.
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Data Mover: Hard disk 1: Failed to initialize Block Reader.
YYYY-MM-DDTHH:MM:SS INFO:   [@(#) Build number: 66] Data Mover: Hard disk 1: Cleaned up after data movement.
YYYY-MM-DDTHH:MM:SS INFO:   [@(#) Build number: 66] Data Mover: Hard disk 3: Preparing for data movement.
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Failed to backup virtual disk "Hard disk 1".
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Data Mover: Hard disk 3: VDDK: Failed to open source VMDK "[Datastore] sVM_name/VM_name_2-000002.vmdk": VDDK Error: 13: You do not have access rights to this file.
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Data Mover: Hard disk 3: Failed to initialize Block Reader.
YYYY-MM-DDTHH:MM:SS INFO:   [@(#) Build number: 66] Data Mover: Hard disk 3: Cleaned up after data movement.
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Failed to backup virtual disk "Hard disk 3".

Komennolla /opt/emc/vproxy/runtime/logs/vbackupd/vbackupd-vddk.log näkyy

YYYY-MM-DDTHH:MM:SS NOTICE: VDDK INFO VixDiskLib: VixDiskLib_OpenEx: Open a disk.
YYYY-MM-DDTHH:MM:SS NOTICE: VDDK INFO YYYY-MM-DDTHH:MM:SS error -[21154] [Originator@6876 sub=transport] Mounting 42229cff-3484-fb68-ed83-674d7a152728 using transport hotadd failed : .
YYYY-MM-DDTHH:MM:SS NOTICE: VDDK INFO YYYY-MM-DDTHH:MM:SS error -[21154] [Originator@6876 sub=transport] Cannot use mode hotadd to access [Datastore] VM_name/VM_name_2-000002.vmdk: Cannot mount using this method. (Mounting 42229cff-3484-fb68-ed83-674d7a152728 using transport hotadd failed : .)
YYYY-MM-DDTHH:MM:SS NOTICE: VDDK INFO VixDiskLib: Unable to locate appropriate transport mode to open disk. Error 13 (You do not have access rights to this file) (Mounting 42229cff-3484-fb68-ed83-674d7a152728 using transport hotadd failed : .) at 5294.
YYYY-MM-DDTHH:MM:SS NOTICE: VDDK INFO VixDiskLib: VixDiskLib_OpenEx: Cannot open disk [Datastore] VM_name/VM_name_2-000002.vmdk. Error 13 (You do not have access rights to this file) (Mounting 42229cff-3484-fb68-ed83-674d7a152728 using transport hotadd failed : .) at 5434.
YYYY-MM-DDTHH:MM:SS NOTICE: VDDK INFO VixDiskLib: VixDiskLib_Open: Cannot open disk [Datastore] VM_name/VM_name_2-000002.vmdk. Error 13 (You do not have access rights to this file) at 5478.YYYY-MM-DDTHH:MM:SS INFO:   [@(#) Build number: 66] Data Mover: Hard disk 1: Preparing for data movement.
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Data Mover: Hard disk 1: VDDK: Failed to open source VMDK "[Datastore] VM_name/VM_name-000002.vmdk": VDDK Error: 13: You do not have access rights to this file.
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Data Mover: Hard disk 1: Failed to initialize Block Reader.
YYYY-MM-DDTHH:MM:SS INFO:   [@(#) Build number: 66] Data Mover: Hard disk 1: Cleaned up after data movement.
YYYY-MM-DDTHH:MM:SS INFO:   [@(#) Build number: 66] Data Mover: Hard disk 3: Preparing for data movement.
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Failed to backup virtual disk "Hard disk 1".
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Data Mover: Hard disk 3: VDDK: Failed to open source VMDK "[Datastore] sVM_name/VM_name_2-000002.vmdk": VDDK Error: 13: You do not have access rights to this file.
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Data Mover: Hard disk 3: Failed to initialize Block Reader.
YYYY-MM-DDTHH:MM:SS INFO:   [@(#) Build number: 66] Data Mover: Hard disk 3: Cleaned up after data movement.
YYYY-MM-DDTHH:MM:SS ERROR:  [@(#) Build number: 66] Failed to backup virtual disk "Hard disk 3".

vCenterissä on käynnissä 100 VM-varmuuskopiointiistuntoa, ja ylimääräisiä virtuaalikoneita voi näkyä jonossa.

Cause

Ajoitetun VMware Protection Workflow -toiminnon suorituksen aikana on käynnissä liian monta samanaikaista hotadd-istuntoa.  Dell EMC NetWorker VMware Integration Guide -oppaan Performance and scalability -osassa suositellaan alle 100 samanaikaista varmuuskopiointi-istuntoa vCenter-palvelinta kohden.

Resolution

Vähennä samanaikaisten hotadd-istuntojen määrää ajoitetun VMware Protection Workflow -toiminnon suorituksen aikana poistamalla vProxy-laitteita tai muuttamalla hotadd-istuntojen määrää vProxy-laitetta kohden.

Products

NetWorker
Article Properties
Article Number: 000174390
Article Type: Solution
Last Modified: 15 Nov 2023
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.