PowerScale：启用安全启动会导致升级到 OneFS 9.5.1.0 失败

Summary: 启用安全启动会导致升级到 OneFS 9.5.1.0 时升级失败。原因被确定为启动清单文件出现问题。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

重新启动节点以进行升级时，启动过程无法完成。使用空调制解调器线缆和终端程序连接到节点时，您将看到类似的消息：
  
140100,0x80000)
Setting currdev to disk3p6:
isi_set_efi_variable: Set 'isilon-journal-size'='0000000001000000'
Testing hash: sha1 Passed
Testing hash: sha256 Passed
Testing hash: sha384 Passed
Testing hash: sha512 Passed
cannot verify: /boot/lua/../manifest.rcerts: Validation failed, err = 62
Startup error in /boot/lua/loader.lua:
LUA ERROR: cannot open /boot/lua/loader.lua: no error.

currdev = disk3p6:
Unverified /boot/kernel/kernel: Validation failed, err = 62
can't load 'kernel'

Type '?' for a list of commands, 'help' for more detailed help.

Cause

清单文件问题会触发安全启动功能检查失败，从而导致节点无法启动。

Resolution

此问题的永久修复是在 OneFS 9.5.1.1 及更高版本中，客户应升级到较新的代码。

如果客户需要 OneFS 9.5.1.0，则唯一的选项是禁用安全启动功能，直到您可以升级到 9.5.1.1 或更高版本。  有关禁用安全启动的文档，请访问 https://infohub.delltechnologies.com/en-us/l/dell-powerscale-onefs-security-considerations/configuration-4151/

Affected Products

PowerScale, Isilon Gen6.5, PowerScale Archive A300, PowerScale Archive A3000, PowerScale B100, PowerScale F200, PowerScale F210, PowerScale F600, PowerScale F710, PowerScale F900

Products

PowerScale F910, PowerScale Hybrid H700, PowerScale Hybrid H7000, PowerScale P100
Article Properties
Article Number: 000231619
Article Type: Solution
Last Modified: 13 Feb 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.