PowerFlex: EMC-MIB.MIB missing
Summary: When loading scaleio.mib, it complains about missing "EMC-MIB.MIB" file.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Issue Description
When loading scaleio.mib, it complains about a missing "EMC-MIB.MIB" file.
Scenario
Scaleio.mib cannot be loaded when testing Simple Network Management Protocol (SNMP) traps from ScaleIO.
Symptoms
Depending on the monitoring software, the errors may be different, but are similar to the following:
operation LoadMib failed"..Failed to load MIB modules from scalio.mib: problems were repported during parsing, unable to load requested" MIBs"ERROR : Cannot find module file://<path>/scaleio.mib:Line 7:Column 54:EMC-MIB
Impact
Unable to load the scaleio.mib (provided in ScaleIO 2.0 User Guide)
Cause
The scaleio.mib file indicates an "EMC-MIB.MIB", which must be placed in the same directory as scaleio.mib.
Resolution
Workaround
Contact Dell ScaleIO Technical Support and quote this article ID and obtain the EMC-MIB.MIB. Technical Support can provide the MIB. Place it in the same directory as scaleio.mib.
Impacted versions
All versions
Fixed in version
N/A
Products
PowerFlex rack, PowerFlex Appliance, PowerFlex custom nodeArticle Properties
Article Number: 000171170
Article Type: Solution
Last Modified: 02 Sept 2025
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.