MySQL을 위한 Data Domain - DDBoostFS 플러그인 애플리케이션 검증 및 모범 사례: Percona Xtrabackup

Summary: 이 KB에서는 Data Domain DD Boost 파일 시스템 플러그인(BoostFS)을 사용하는 애플리케이션에 대한 모범 사례 및 구성 지침을 제공합니다. 또한 BoostFS의 모든 이점을 극대화하기 위해 애플리케이션을 구성하는 방법에 대한 통찰력과 팁이 포함되어 있습니다. Percona XtraBackup은 Percona Server, MySQL® 및 MariaDB®의 모든 버전에 대한 무료 오픈 소스 완전 온라인 백업 솔루션입니다. 100만 회 이상 다운로드된 Percona XtraBackup**은 트랜잭션 시스템에서 안전하고 차단되지 않으며 압축된 백업을 수행하여 계획된 유지 관리 기간 동안 중단 없는 애플리케이션 가용성을 보장합니다. 운영 환경에서 서버 성능을 유지하는 신뢰할 수 있는 MySQL 핫 백업 솔루션입니다. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

BoostFS
설정백업할 MySQL 서버에 BoostFS를 설치합니다.

BoostFS를 사용하여 마운트 지점/백업을 생성하고 DD 스토리지 유닛을 마운트합니다.

압축 및 암호화 비활성화

 

--compress[=name] Compress individual backup files using the specified compression algorithm.

Currently the only supported algorithm is 'quicklz'. It is also the default algorithm, i.e. the one used when --compress is used without an argument.

By default compression is disabled, so backup command without this option will backup without compression.

--encrypt=name Encrypt individual backup files using the specified encryption algorithm.


다중 스트림 구성

CLI option --parallel as shown in above backup/restore command enables multi-stream (<64).


백업을 수행하는 방법

/usr/bin/xtrabackup --user=root --password=Password@123 --host=ostqa-len35.datadomain.com --port=3306 --databases=db1 --
parallel=50 --backup --target-dir=/mounts/bfs/gen0 --data-dir=/mnt/1tbpart/mysql &> xtrabackup-$BFSPREFIX.out


복원을 수행하는 방법

/usr/bin/xtrabackup --user=root --password=Password@123 --host=ostqa-len35.datadomain.com --port=3306 --databases=db1 --
parallel=60 --copy-back --target-dir=/mounts/bfs/gen0 --data-dir=/mnt/1tbpart/mysql &> xtrabackup-$BFSPREFIX.out


모범 사례 - Percona Xtrabackup
1. 데이터 중복 제거 향상을 위해 소프트웨어 압축 및 암호화를 비활성화합니다.
2. 처리량을 높이기 위해 다중 스트림을 활성화합니다.
3. 멀티스트림 복구는 지원되지 않습니다.
4. BoostFS 플러그인당 최대 63개의 스트림

Windows 및 Linux 모두에 BoostFS 구성 및 사용 가이드의 boostfs 마운트에 대한 추가 명령 옵션 
 

옵션 설명
-o allow-others=<참 | 거짓>

클라이언트 시스템에서 boostfs 마운트 소유자가 아닌 사용자를 허용합니다. 

기본값: false

 

Additional Information

이 백서에서는 Windows 및 Linux 애플리케이션 호스트용 Dell EMC™ DD Boost - 파일 시스템(BoostFS)의 배포 및 구성에 대해 중점적으로 다룹니다. 

Boostfs 드라이버 및 다운로드
https://www.dell.com/support/home/en-us/product-support/product/data-domain-boost-file-system/drivers

Boostfs 구성 가이드
https://www.dell.com/support/home/en-us/product-support/product/data-domain-boost-file-system/docs

 
 

Affected Products

Data Domain
Article Properties
Article Number: 000206566
Article Type: How To
Last Modified: 30 Sept 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.