Dell Networking OS6 N 系列交换机获得日志 ERR 截断整数值> 32 位
Summary: 本文介绍 Dell Networking OS6 中日志消息 ERR 截断整数值> 32 位。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
将在日志中注册一条消息,如下所示填写交换机缓冲日志
General[procLOG]: l7_ns_mibs.c(XXXX) XXXXXXXX %% ERR truncating integer value > 32 bits
影响如下:
- 对交换机没有功能影响
- 在轮询交换机正常运行时间时,出现错误的正常运行时间。
- 如下所示的日志消息将填满缓冲日志
Mar 22 21:39:51 General[procLOG]: l7_ns_mibs.c(XXXX) XXXXXXXX %% ERR truncating integer value > 32 bits
Cause
- 如果交换机正常运行时间超过 497 天,则在执行 snmp 轮询以遵循 MIB 或 OID 时,将输出此消息
SNMP MIB : agentInventoryUnitUpTime SNMP OID : 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.13.2.2.1.14
- 此日志消息的原因是,MIB agentInventoryUnitUpTime 为 Counter32,这意味着它是一个 32 位整数计数器。如果超过 497 天的交换机正常运行时间,则其相应的整数值超过 32 位,因此值溢出。
Resolution
建议执行以下操作。
1.从 6.8.1.1 开始,此日志消息级别为 DEBUG 而不是 ERROR。因此,它可以升级到任何固件到 6.8.1.1 及更高版本。
2. 停止轮询到
3.重新启动交换机,以便重置正常运行时间值。
1.从 6.8.1.1 开始,此日志消息级别为 DEBUG 而不是 ERROR。因此,它可以升级到任何固件到 6.8.1.1 及更高版本。
2. 停止轮询到
SNMP MIB : agentInventoryUnitUpTime SNMP OID : 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.13.2.2.1.14
3.重新启动交换机,以便重置正常运行时间值。
Affected Products
PowerSwitch N1100-ON Series, PowerSwitch N1500 Series, PowerSwitch N2000 Series, PowerSwitch N2100 Series, PowerSwitch N2200-ON Series, Dell EMC PowerSwitch N3000E-ON Series, Dell EMC Networking N3200-ON, PowerSwitch N4000 SeriesArticle Properties
Article Number: 000218453
Article Type: Solution
Last Modified: 12 Oct 2023
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.