Dell APEX Cloud Platform:事件代碼 0508DPU9027

Summary: 支援 iDRAC 事件監控:DPU9027

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

發生 iDRAC 事件DPU9027,並出現警告事件「0508DPU9027」

Cause

訊息中識別的 DPU 作業系統尚未準備好正常運作,因為開機同步期間已逾時,或開機同步逾時值太短。

Resolution

根據您的 DPU 組態增加 DPUOSReadyTimeout 值。如果問題仍然存在,請重新安裝 DPU 作業系統,然後開啟伺服器電源。

1. 按照以下步驟確認 DPU 連線能力,並記下插槽編號:
image.png
2.請按照以下步驟確認 DPU 屬性已正確設定:  
#ssh username@hostname-iDRAC 或 username@<iDrac_IP>
racadm>>get system.pcislot。<slot_num>。DPUTrust
[Key=system.Embedded.1#PCISlot.2]
DPUTrust=Enabled
racadm>>get system.pcislot.<slot_num>。DPUBootSynchronization
[金鑰=系統。Embedded.1#PCISlot.2]
DPUBootSynchronization=Enabled

如果其中任何一個已停用,請啟用,如下所示:
racadm>>set system.pcislot。<slot_num>。DPUTrust 1
[Key=system.Embedded.1#PCISlot.2]
物件值修改成功
racadm>>set system.pcislot。<slot_num>。DPUBootSynchronization 1
[Key=system.Embedded.1#PCISlot.2]
物件值修改成功

3.請按照以下步驟檢查目前的開機同步逾時值:
racadm>>get system.pcislot。<slot_num>。DPUOSReadyTimeout
[key=system.Embedded.1#PCISlot.2]
DPUOSReadyTimeout=10

可以像下面
這樣增加:racadm>>set system.pcislot。<slot_num>。DPUOSReady逾時 20

Affected Products

APEX Cloud Platforms Solution Offerings
Article Properties
Article Number: 000221801
Article Type: Solution
Last Modified: 05 Mar 2026
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.