Connectrix B-Series: SNMPv3 사용자가 취약한 암호 프로토콜을 사용할 때 경고 표시

Summary: FOS 9.2.x를 실행하는 Connectrix B-Series 스위치에서 발생하는 SNMPv3 경고를 해결하려면 더 이상 사용되지 않는 MD5 및 SHA 대신 SHA512 인증 프로토콜을 사용하십시오.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Message:
WARNING: Some of the SNMPv3 users are configured with authentication protocols MD5 and SHA, which are deprecated in the target FOS version. 
Please migrate to using SHA512 as soon as possible after upgrade. 
Using SHA512 will be required to upgrade to the next FOS release.


SNMPv3 사용자 계정 구성:

SNMPv3 사용자 계정을 구성하려면 다음 단계를 수행하십시오.
  1. 관리자 역할을 사용하여 스위치에 로그인합니다.
  2. 아래 명령을 실행하여 SNMPv3 구성 메뉴에 액세스합니다.
`snmpconfig --set snmpv3` 
  1. SNMPv3 사용자 계정에 대한 인증 프로토콜을 SHA512(옵션 4) 로 선택합니다.
  2. 새 인증 암호를 입력하고 확인합니다.
  3. SNMPv3 사용자 계정에 대해 개인 정보 보호 프로토콜을A ES256(옵션 4) 으로 선택합니다.
  4. 새 개인 정보 보호 암호를 입력하고 확인합니다.
  5. 변경 사항을 저장하고 구성 메뉴를 종료합니다.

SNMPv3 구성 확인:

아래 답변 및 명령을 따르십시오.
sw0:FID128:admin> snmpconfig --set snmpv3

SNMP Informs Enabled (true, t, false, f): [false]

SNMPV3 Password Encryption Enabled (true, t, false, f): [true]

SNMPv3 user configuration(snmp user not configured in FOS user database will have default VF context and admin role as the default):


User (ro): [admin]

Auth Protocol [MD5(1)/SHA(2)/noAuth(3)/SHA512(4)]: (1..4) [4]

New Auth Passwd:

Priv Protocol [DES(1)/noPriv(2)/AES128(3)/AES256(4)]): (1..4) [4]

New Priv Passwd:

SNMPv3 trap/inform recipient configuration:

Trap Recipient's IP address : [10.173.120.xx]

주의: SHA 및 MD5 인증 프로토콜은 더 이상 사용되지 않으며 향후 FOS 릴리스에서 문제가 발생할 수 있습니다. SHA512를 SNMPv3 사용자 계정의 인증 프로토콜로 사용하는 것이 좋습니다.

Additional Information

SHA512는 FOS 9.2.0에서 지원되는 인증 프로토콜이므로 SHA512를 사용하는 것이 좋습니다.

Affected Products

Connectrix B-Series Fabric OS 9.X, Connectrix B-Series Hardware
Article Properties
Article Number: 000309272
Article Type: How To
Last Modified: 21 Nov 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.