Connectrix B-serie: Waarschuwing weergeven wanneer SNMPv3-gebruiker zwakke coderingsprotocollen gebruikt
Summary: Gebruik het SHA512-verificatieprotocol in plaats van verouderde MD5 en SHA om de SNMPv3-waarschuwing op te lossen op Connectrix B-serie switches waarop FOS 9.2.x wordt uitgevoerd.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Bericht:
Ga als volgt te werk om het SNMPv3-gebruikersaccount te configureren:
Let op: Het gebruik van SHA- en MD5-verificatieprotocollen is verouderd en kan problemen veroorzaken in toekomstige FOS-releases. Het wordt aanbevolen SHA512 te gebruiken als authenticatieprotocol voor SNMPv3-gebruikersaccounts.
WARNING: Some of the SNMPv3 users are configured with authentication protocols MD5 and SHA, which are deprecated in the target FOS version. Please migrate to using SHA512 as soon as possible after upgrade. Using SHA512 will be required to upgrade to the next FOS release.
Configuring SNMPv3 User Account:
Ga als volgt te werk om het SNMPv3-gebruikersaccount te configureren:
- Meld u aan bij de switch met de beheerdersrol.
- Voer de onderstaande opdracht uit om toegang te krijgen tot het SNMPv3-configuratiemenu:
`snmpconfig --set snmpv3`
- Selecteer het verificatieprotocol SHA512 (optie 4) voor het SNMPv3-gebruikersaccount.
- Voer een nieuw authenticatiewachtwoord in en bevestig dit.
- Selecteer het privacyprotocol als AES256 (optie 4) voor het SNMPv3-gebruikersaccount.
- Voer een nieuw privacywachtwoord in en bevestig dit.
- Sla de wijzigingen op en sluit het configuratiemenu.
De SNMPv3-configuratie verifiëren:
Volg de onderstaande antwoorden en opdrachten:sw0:FID128:admin> snmpconfig --set snmpv3 SNMP Informs Enabled (true, t, false, f): [false] SNMPV3 Password Encryption Enabled (true, t, false, f): [true] SNMPv3 user configuration(snmp user not configured in FOS user database will have default VF context and admin role as the default): User (ro): [admin] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)/SHA512(4)]: (1..4) [4] New Auth Passwd: Priv Protocol [DES(1)/noPriv(2)/AES128(3)/AES256(4)]): (1..4) [4] New Priv Passwd: SNMPv3 trap/inform recipient configuration: Trap Recipient's IP address : [10.173.120.xx]
Let op: Het gebruik van SHA- en MD5-verificatieprotocollen is verouderd en kan problemen veroorzaken in toekomstige FOS-releases. Het wordt aanbevolen SHA512 te gebruiken als authenticatieprotocol voor SNMPv3-gebruikersaccounts.
Additional Information
Het wordt aanbevolen om SHA512 te gebruiken, omdat dit het ondersteunde authenticatieprotocol is op FOS 9.2.0.
Affected Products
Connectrix B-Series Fabric OS 9.X, Connectrix B-Series HardwareArticle Properties
Article Number: 000309272
Article Type: How To
Last Modified: 21 Nov 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.