Dell Servers, Storage, Networking Products: Minimum, Recommended, and Latest Code Versions - II

See the resolution section for the list of Minimum-Supported Code, Recommended, Target, Long-Term Support (LTS) Code, and Latest Code versions.

This article was last updated on 21-September-2026. See the Drivers & Downloads pages links below in each product table below for information about the most current releases available as of today.

Compatibility and Interoperability Solution:
Checking for compatibility and interoperability information is important before performing an upgrade. The E-Lab Navigator (Log in to Dell Support required) solution helps provide that information for Latest and Recommended (Target) code for hardware and software configurations for multiple products. Similar information is available for other products in the release notes and related Documentation pages. This may include upgrade path special considerations, where applicable. If there are queries, contact Dell Technical Support.

Products are listed within their corresponding sections. See the Table of Contents below.

Dell Technologies carefully evaluates and monitors code deployment data. This ensures that product releases meet our stringent expectations to provide customers with reliable products and solutions.

Table of Contents

Term Definitions

Index

Please see Dell Servers, Storage, Networking Products: Minimum, Recommended, and Latest Code Versions - I for the other products not covered in this list

CyberSense
PowerProtect Cyber Recovery
PowerProtect Data Manager
PowerProtect Data Manager Appliance (DM5500)
PowerProtect DD
PowerProtect Integrated Data Protection Appliance (IDPA)
PowerProtect One
PowerScale/Isilon OneFS
PowerScale Insight IQ
PowerScale for Public Cloud
PowerStore
PowerVault (ME4 & ME5)
PowerVault (MD/ML/TL)
PowerVault (NX)
RecoverPoint Physical (RP/SE, RP/CL, RP/EX)
Recover Point for Virtual Machines
SDWAN Virtual Edge Platform
Secure Connect Gateway (SCG)
SmartFabric Manager
SmartFabric OS10
SmartFabric Storage Software
Storage Resource Manager
VMAX
VNX
vProtect
VPLEX/Metro Node
VxBlock
VxRail and VCF on VxRail
XC Series-Core (Nutanix)
XtremIO X1
XtremIO X2

Term Definitions

What is the Latest Code?

• The latest version is released with General Availability for each product, providing the latest functionality - including cumulative security and other enhancements
• These versions may have been released recently, and thus initially have limited adoption and cumulative runtime on the field.
• Latest versions might be designated as Recommended releases once they have been determined to meet the applicable criteria.

What is the Recommended Code?

• Recommended code is a specific code version that has been found to be reliable, including high stability, security, and quality requirements. Specific criteria used to determine Recommended versions might vary across products.
• Recommended versions are set at the third number, and customers are encouraged to upgrade to the latest maintenance update from the 'Drivers and Download' section of the Product Support Page.

What is the Minimum-Supported Code?

• Oldest version of code that is supported under standard contracts, as per Service Descriptions for new contracts (effective August 03, 2024).
• For applicable contracts, Dell Technologies reserves the right to deny warranty support for Products with installed code older than the specified Minimum-Supported Code.
• Minimum Supported Code is typically a version released around 24 months ago, although this may vary by product.
• Regardless of contractual applicability, all customers are encouraged to maintain code at least at the Minimum-Supported Code level, and preferably at the corresponding Recommended version for each respective product.

Compatibility and Interoperability Solution: Go to E-Lab Navigator for compatibility and Interoperability information about code versions for hardware and software configurations.

For additional information about Long-Term Support (LTS) Releases and Target Code, including RunTime Hours, see article Active Target and LTS Codes with RunTime hours for Dell Technologies Products (Dell Support account is required to view this article)

Please see Dell Servers, Storage, Networking Products: Minimum, Recommended, and Latest Code Versions - I for the other products not covered in this list

See the release notes for the upgrade path special considerations. If there are queries, contact Dell Technical Support.

21st September

Table: RecoverPoint for Virtual Machines
- RecoverPoint for Virtual Machines: Latest Code Version 6.0.3.1 -> 6.1.0.0

Table: VPLEX
- MetroNode mn-114: Recommended Code Version 9.0.0 -> 9.1.0
- MetroNode mn-215: Recommended Code Version 9.0.0 -> 9.1.0
- MetroNode mn-216: Recommended Code Version 9.0.0 -> 9.1.0

15th September

- PowerProtect Data Manager: Minimum Code Version 19.16.0 -> 19.17.0

• PowerProtect DD: Latest Code Version 8.8.0.0 -> 8.9.0.0

10th September

• Moved CyberSense to this KB with other Data Protection Products. 

31st August

Table: Secure_Connect_Gateway_SCG
- Secure Connect Gateway - Application Edition: Latest Code Version 5.34.00.00 -> 5.36.00.00, Recommended Code Version 5.34.00.00 -> 5.36.00.00, Minimum Code Version 5.30.00.00 -> 5.32.00.00
- Secure Connect Gateway - Virtual Edition: Latest Code Version 5.34.00.16 -> 5.36.00.16, Recommended Code Version 5.34.00.16 -> 5.36.00.16, Minimum Code Version 5.30.00.14 -> 5.32.00.20