Connectrix: Webtools, elementbeheer, geeft de status van de poort niet weer onder Dashboard voor FOS-versies na 9.x
Summary: Dit probleem doet zich voor bij Webtools, elementbeheer van switches met firmware na 9.x, waarbij de status van de poort niet wordt weergegeven hoewel poorten online zijn.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Poortstatus toont geen data:
Afbeelding 1: Schermafbeelding van Port Health met geen data
Cause
Dit probleem heeft de volgende redenen:
- Poorten worden niet groen weergegeven op het overzichtstabblad van de switch, waardoor de status van de poort niet onder het dashboard wordt weergegeven
- Synchronisatie gemist omdat achtergrond vastloopt
Resolution
We moeten deze gegevens vernieuwen en er zijn twee actieplannen:
REGELING 1:
Root-toegang is vereist om deze activiteit op de switch uit te voeren. Start de HTTP-services voor Webtools opnieuw.
SAN-SWITCH1:root> /fabos/libexec/webdconfigure http attributes (yes, y, no, n): [no] y HTTP Restart (yes, y, no, n): [no] y HTTP enabled (yes, y, no, n): [yes] y ErrorLog Enabled (yes, y, no, n): [no] AccessLog Enabled (yes, y, no, n): [no] SSLLog Enabled (yes, y, no, n): [no] HTTP Port: (1..60000) [80] Secure HTTP Port: (1..60000) [443] HTTP IsAlive Check Enabled (yes, y, no, n): [yes] HTTP Max HeapSize: (256..1024) [512] webtools attributes (yes, y, no, n): [no] cal attributes (yes, y, no, n): [no]
Of
REGELING 2:
Voer de volgende opdracht uit:
Departmental model: #hareboot Director class model: #hafailover
Affected Products
Connectrix B-Series Fabric OS 9.X, Connectrix B-Series SoftwareArticle Properties
Article Number: 000201036
Article Type: Solution
Last Modified: 17 Dec 2024
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.