Isilon：CMC 上的节点固件升级失败

Summary: CMC 组件的节点固件升级可能会遇到故障/错误，需要冷重置或释放节点电量以解决此问题。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms



在节点固件升级期间，CMC 固件更新失败/出错。

在发生故障的节点上的 /var/log/isi_firmware.log中，将显示类似于以下内容的输出： 
2017-05-11 15:18:58,991 ERROR    [17093] : Node 6: CMCFirmware._update: update failed: error=65280 output:
TARGET UPGRADE CAPABILITIES
-------------------------------
HPM.1 version............0
Component 0 presence....[y]
Component 1 presence....[y]
Component 2 presence....[y]
Component 3 presence....[y]
Component 4 presence....[n]
Component 5 presence....[n]
Component 6 presence....[n]
Component 7 presence....[y]
Upgrade undesirable.....[n]
Aut rollback override...[n]
IPMC degraded...........[y]
Defered activation......[n]
Service affected........[n]
Manual rollback.........[n]
Automatic rollback......[n]
Self test...............[n]
Upgrade timeout.........[300 sec]
Self test timeout.......[0 sec]
Rollback timeout........[300 sec]
Inaccessibility timeout.[300 sec]

GENERAL PROPERTIES
-------------------------------
Payload cold reset req....[n]
Def. activation supported.[n]
Comparison supported......[n]
Preparation supported.....[y]
Rollback supported........[y]

Description string: CMC FW

Current Version:
 Major: 00
 Minor: 0b
 Aux  : 00 00 00 00

Validating firmware image integrity...OK
Performing preparation stage...TARGET UPGRADE CAPABILITIES
-------------------------------
HPM.1 version............0
Component 0 presence....[y]
Component 1 presence....[y]
Component 2 presence....[y]
Component 3 presence....[y]
Component 4 presence....[n]
Component 5 presence....[n]
Component 6 presence....[n]
Component 7 presence....[y]
Upgrade undesirable.....[n]
Aut rollback override...[n]
IPMC degraded...........[y]
Defered activation......[n]
Service affected........[n]
Manual rollback.........[n]
Automatic rollback......[n]
Self test...............[n]
Upgrade timeout.........[300 sec]
Self test timeout.......[0 sec]
Rollback timeout........[300 sec]
Inaccessibility timeout.[300 sec]

GENERAL PROPERTIES
-------------------------------
Payload cold reset req....[n]
Def. activation supported.[n]
Comparison supported......[n]
Preparation supported.....[y]
Rollback supported........[y]

OK
Error initiating upgrade action, compcode = ff

Firmware upgrade procedure failed

Error aborting upgrade, compcode = 80

...

-----------------------------------------------------------------
|ID | Name      | Active  |   Upload Progress   | Upload| Image |
|   |           | Version |0%      50%      100%| Time  | Size  |
|---|-----------|---------||----+----+----+----||-------|-------|
...Failed...
-----------------------------------------------------------------

In OneFS 8.0, this would also cause output similar to the following for upgrade commands:

Isilon-1# isi upgrade nodes firmware progress list
Lnns  Device               Old Version             New Version             Status
-----------------------------------------------------------------------------------
...
6     CMCSDR_Yeti          00.06                   00.06                   -
6     CMC_Yeti             00.0b                   02.05                   error
6     IsilonFPV1           UI.01.36                UI.01.36                -
...
-----------------------------------------------------------------------------------
Total: 75
Isilon-1# isi upgrade nodes view 6
             Node LNN: 6
   Node Upgrade State: error
        Error Details: Failed Step: InstallFirmware
                       Error Log: /ifs/.ifsvar/upgrade/Agent-6-000e1e591a20232c8a58011809d7e56ff3fb.log
  Last Upgrade Action: -
   Last Action Result: -
Node Upgrade Progress: None
         Node OS Version: 8.0.0.4_build(53)style(5)

Isilon-1# isi_upgrade_logs
Copied log to /ifs/upgrade_error_logs/6_isi_Upgrade_Agent.py-InstallFirmware.log

Isilon-1# cat /ifs/upgrade_error_logs/6_isi_Upgrade_Agent.py-InstallFirmware.log
Starting /usr/sbin/isi_Upgrade_Agent.py InstallFirmware

Verifying boot device mirrors are synced...
2017-05-11 15:18:42,876 DEBUG Execute Command: InstallFirmware
2017-05-11 15:18:59,005 ERROR Failed to update CMC_Yeti firmware on Node 6

Cause

此问题是由 CMC 组件在节点固件更新期间未及时响应引起的。

Resolution

可以通过对节点上的 BMC 和 CMC 组件执行冷重置来解决此问题，或者，如果冷重置不能解决问题，则必须根据 https://support.emc.com/kb/466373 执行节点断电和耗尽电源。  如果任一步骤均无法解决问题，请上报给 Isilon 技术支持团队进行进一步分析。

要重置 CMC，请在受影响的节点上运行以下命令：
/usr/bin/isi_hwtools/isi_ipmicmc -c -a cmc

输出示例： 
Isilon-6# /usr/bin/isi_hwtools/isi_ipmicmc -c -a cmc
Cold reset CMC
Note - 15 sec wait for CMC...
Checking if Firmware Version MSB is set
MSB set in Firmware Version
Waiting 5 seconds before trying again
Success: MSB cleared in Firmware Version
Checking self test results
Success: self test passed

Once reset, retry the firmware update. 
In OneFS versions prior to 8.0:
isi firmware update

In OneFS versions 8.0 and later:
Review the 'Node Upgrade State' for each node, identify the node that is in an error state, this is the node that the upgrade will be retried on:
isi upgrade nodes list

To retry the upgrade on the node in an error state, run the following command, replace LNN with the node that is showing in an error state:
isi upgrade retry-last-action LNN
 

Affected Products

Isilon

Products

Isilon, Isilon HD400, Isilon NL410, Isilon S210, Isilon X210, Isilon X410
Article Properties
Article Number: 000050382
Article Type: Solution
Last Modified: 11 Oct 2024
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.