Isilon：CMCでノード ファームウェアのアップグレードが失敗する

Summary: CMCコンポーネントへのノード ファームウェアのアップグレードで障害/エラーが発生する可能性があり、この問題を解決するには、コールド リセットまたはノードの電力放電が必要です。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms



ノード ファームウェアのアップグレード中に、CMCファームウェアのアップデートが失敗するかエラーが発生します。

障害が発生したノードの/var/log/isi_firmware.logに、次のような出力が表示されます。 
2017-05-11 15:18:58,991 ERROR    [17093] : Node 6: CMCFirmware._update: update failed: error=65280 output:
TARGET UPGRADE CAPABILITIES
-------------------------------
HPM.1 version............0
Component 0 presence....[y]
Component 1 presence....[y]
Component 2 presence....[y]
Component 3 presence....[y]
Component 4 presence....[n]
Component 5 presence....[n]
Component 6 presence....[n]
Component 7 presence....[y]
Upgrade undesirable.....[n]
Aut rollback override...[n]
IPMC degraded...........[y]
Defered activation......[n]
Service affected........[n]
Manual rollback.........[n]
Automatic rollback......[n]
Self test...............[n]
Upgrade timeout.........[300 sec]
Self test timeout.......[0 sec]
Rollback timeout........[300 sec]
Inaccessibility timeout.[300 sec]

GENERAL PROPERTIES
-------------------------------
Payload cold reset req....[n]
Def. activation supported.[n]
Comparison supported......[n]
Preparation supported.....[y]
Rollback supported........[y]

Description string: CMC FW

Current Version:
 Major: 00
 Minor: 0b
 Aux  : 00 00 00 00

Validating firmware image integrity...OK
Performing preparation stage...TARGET UPGRADE CAPABILITIES
-------------------------------
HPM.1 version............0
Component 0 presence....[y]
Component 1 presence....[y]
Component 2 presence....[y]
Component 3 presence....[y]
Component 4 presence....[n]
Component 5 presence....[n]
Component 6 presence....[n]
Component 7 presence....[y]
Upgrade undesirable.....[n]
Aut rollback override...[n]
IPMC degraded...........[y]
Defered activation......[n]
Service affected........[n]
Manual rollback.........[n]
Automatic rollback......[n]
Self test...............[n]
Upgrade timeout.........[300 sec]
Self test timeout.......[0 sec]
Rollback timeout........[300 sec]
Inaccessibility timeout.[300 sec]

GENERAL PROPERTIES
-------------------------------
Payload cold reset req....[n]
Def. activation supported.[n]
Comparison supported......[n]
Preparation supported.....[y]
Rollback supported........[y]

OK
Error initiating upgrade action, compcode = ff

Firmware upgrade procedure failed

Error aborting upgrade, compcode = 80

...

-----------------------------------------------------------------
|ID | Name      | Active  |   Upload Progress   | Upload| Image |
|   |           | Version |0%      50%      100%| Time  | Size  |
|---|-----------|---------||----+----+----+----||-------|-------|
...Failed...
-----------------------------------------------------------------

In OneFS 8.0, this would also cause output similar to the following for upgrade commands:

Isilon-1# isi upgrade nodes firmware progress list
Lnns  Device               Old Version             New Version             Status
-----------------------------------------------------------------------------------
...
6     CMCSDR_Yeti          00.06                   00.06                   -
6     CMC_Yeti             00.0b                   02.05                   error
6     IsilonFPV1           UI.01.36                UI.01.36                -
...
-----------------------------------------------------------------------------------
Total: 75
Isilon-1# isi upgrade nodes view 6
             Node LNN: 6
   Node Upgrade State: error
        Error Details: Failed Step: InstallFirmware
                       Error Log: /ifs/.ifsvar/upgrade/Agent-6-000e1e591a20232c8a58011809d7e56ff3fb.log
  Last Upgrade Action: -
   Last Action Result: -
Node Upgrade Progress: None
         Node OS Version: 8.0.0.4_build(53)style(5)

Isilon-1# isi_upgrade_logs
Copied log to /ifs/upgrade_error_logs/6_isi_Upgrade_Agent.py-InstallFirmware.log

Isilon-1# cat /ifs/upgrade_error_logs/6_isi_Upgrade_Agent.py-InstallFirmware.log
Starting /usr/sbin/isi_Upgrade_Agent.py InstallFirmware

Verifying boot device mirrors are synced...
2017-05-11 15:18:42,876 DEBUG Execute Command: InstallFirmware
2017-05-11 15:18:59,005 ERROR Failed to update CMC_Yeti firmware on Node 6

Cause

この問題は、ノードのファームウェア アップデート中にCMCコンポーネントがタイムリーに応答しないことが原因で発生します。

Resolution

この問題は、ノード上の BMC および CMC コンポーネントのコールド リセットを実行することで解決できる場合があります。コールド リセットで問題が解決しない場合は、https://support.emc.com/kb/466373 に従ってノードの電源を切り、電力を放電する必要があります。  どちらの手順でも問題が解決しない場合は、詳細な分析のためにIsilonテクニカル サポート チームにエスカレーションしてください。

CMCをリセットするには、影響を受けるノードで次のコマンドを実行します。
/usr/bin/isi_hwtools/isi_ipmicmc -c -a cmc

出力例: 
Isilon-6# /usr/bin/isi_hwtools/isi_ipmicmc -c -a cmc
Cold reset CMC
Note - 15 sec wait for CMC...
Checking if Firmware Version MSB is set
MSB set in Firmware Version
Waiting 5 seconds before trying again
Success: MSB cleared in Firmware Version
Checking self test results
Success: self test passed

Once reset, retry the firmware update. 
In OneFS versions prior to 8.0:
isi firmware update

In OneFS versions 8.0 and later:
Review the 'Node Upgrade State' for each node, identify the node that is in an error state, this is the node that the upgrade will be retried on:
isi upgrade nodes list

To retry the upgrade on the node in an error state, run the following command, replace LNN with the node that is showing in an error state:
isi upgrade retry-last-action LNN
 

Affected Products

Isilon

Products

Isilon, Isilon HD400, Isilon NL410, Isilon S210, Isilon X210, Isilon X410
Article Properties
Article Number: 000050382
Article Type: Solution
Last Modified: 11 Oct 2024
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.