지원되지 않는 Cisco SFP+ 모듈에서 네트워크 성능 문제가 발생합니다
Summary: 이 문서에서는 Broadcom 네트워크 인터페이스 카드와 함께 사용할 때 지원되지 않는 Cisco SPF+ 모듈에 대해 설명합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
이벤트 ID 34 는 시스템 이벤트 로그에 게시됩니다.
로그 이름: 시스템
소스: ebdrv
날짜: 2013-11-28 오전
10:51:15 이벤트 ID: 34
작업 범주: None
Level: Warning
Keywords: Classic
User:
해당 없음 컴퓨터: computername.domain.com
설명:
원본 ebdrv에서 이벤트 ID 34에 대한 설명을 찾을 수 없습니다. Either the component that raises this event is not installed on your local computer or the installation is corrupted. 로컬 컴퓨터에 구성 요소를 설치하거나 복구할 수 있습니다.
이벤트가 다른 컴퓨터에서 발생한 경우 표시 정보를 이벤트와 함께 저장해야 했습니다.
이벤트에는 다음과 같은 정보가 포함되었습니다.
NTPNP_PCI0115
0
CISCO-OEM
SFP-H10GB-CU3M
Cause
Broadcom 57810 NetXtreme II 10기가비트 NIC에서 Cisco SFP+ 모듈 SFP-H10GB-CU3M을 지원하지 않고 사용하면 네트워크 성능 문제가 발생할 수 있습니다. iSCSI 연결이 간헐적으로 끊길 수 있습니다.
Resolution
SFP+ 모듈을 지원되는 모듈로 교체합니다.
Affected Products
Microsoft Windows Server 2016, Microsoft Windows Server 2019, Microsoft Windows Server 2022, Microsoft Windows Server 2025, Microsoft Windows 2008 Server R2, Microsoft Windows 2012 Server, Microsoft Windows 2012 Server R2Article Properties
Article Number: 000137535
Article Type: Solution
Last Modified: 05 Sept 2025
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.