PowerEdge:Microsoft HCI 部署:使用 iWARP 配置 QLogic NIC

Summary: 配置 QLogic FastLinQ 41262 网络适配器所需的步骤,如“Dell Technologies 的 Microsoft HCI 解决方案”部署指南中所定义,以启用 RDMA、iWARP 和禁用 DCB。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

配置 QLogic NIC
为每个端口配置 QLogic 网络适配器。

 

步骤:

  1. 在系统启动过程中,按 F2 键进入系统设置程序。
  2. 单击 System BIOS ,然后选择 Device Settings
  3. 从适配器列表中选择 QLogic 网络适配器。
  4. 单击Device Level Configuration 并确保 Virtualization Mode 设置为 None
  5. 单击 Back,然后单击 NIC Configuration
  6. NIC 配置 页面中,选择以下选项:
    1. Link Speed:SmartAN
    2. NIC + RDMA Mode:Enabled
    3. RDMA Operational Mode:iWARP
    4. Boot Protocol:无
    5. Virtual LAN Mode:禁用
  7. 单击 Back,然后单击 Data Center Bridging (DCB) Settings
  8. 数据中心桥接 (DCB) 设置 页面上,将 DCBX 协议 设置为 已禁用
  9. 单击Back(上一步),单击 Finish(完成),然后单击 Yes(是 )以保存设置。
  10. 单击是以返回到设备设置页面。
  11. 选择 QLogic 适配器的第二个端口,然后重复上述步骤。
  12. 单击 Finish(完成 )以返回到 System Setup 页面。
     

Additional Information

如何使用 iWARP 配置 Qlogic NIC

持续时间:00:04:54 (hh:mm:ss)
如果可用,可以使用此视频播放器上的 CC 图标选择隐藏式字幕(字幕)语言设置。

Videos

<iframe width="560" height="315" src="https://www.youtube.com/embed/Q71YYyw_ro8" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Affected Products

Microsoft Windows Server 2019, Microsoft Windows Server 2022, QLogic Family of Adapters

Products

PowerEdge XR2, PowerEdge C6420, PowerEdge C6520, PowerEdge FC640, PowerEdge M640, PowerEdge M640 (for PE VRTX), PowerEdge R440, PowerEdge R450, PowerEdge R540, PowerEdge R550, PowerEdge R640, PowerEdge R6415, PowerEdge R650, PowerEdge R650xs , PowerEdge R6515, PowerEdge R6525, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R840, PowerEdge R940, PowerEdge R940xa, PowerEdge T550, PowerEdge T640 ...
Article Properties
Article Number: 000199198
Article Type: How To
Last Modified: 05 Sept 2025
Version:  8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.