PowerEdge：将服务器升级到域控制器后，从“设置应用程序”更改网络适配器时出错

Summary: 本文介绍如何解决 Windows 错误“Windows 无法访问指定的设备、路径或文件。您可能没有访问该项目的相应权限”。此行为发生在 Windows Server 2016、2019 和 2022 上。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

错误消息的屏幕截图：

错误消息的屏幕截图

Cause

这与作系统处理集成管理帐户访问权限的方式有关。

Resolution

要解决此问题，您必须启用 用户帐户控制：使用组策略对象的集成管理员帐户的管理员审批模式

  1. 以管理员身份打开 Powershell 并运行 gpedit.msc

在 Windwos 中运行 PowerShell 的屏幕截图gpedit.msc 命令

  1. 转至：

计算机配置>Windows 设置>安全设置>“安全选项”，然后双击“用户帐户控制”：集成管理员帐户的管理员批准模式 ，然后 启用 它：

在 Windows 中启用管理员审批模式

在 Windows 中启用管理员审批模式

  1. 重新启动 服务器以应用更改，现在您可以从 设置应用程序更改适配器设置。

更改适配器设置

Affected Products

Microsoft Windows Server 2016, Microsoft Windows Server 2019, Microsoft Windows Server 2022, PowerEdge R440, PowerEdge R450, PowerEdge R470, PowerEdge R540, PowerEdge R550, PowerEdge R570, PowerEdge R640, PowerEdge R6415, PowerEdge R650 , PowerEdge R650xs, PowerEdge R6515, PowerEdge R6525, PowerEdge R660, PowerEdge R660xs, PowerEdge R6615, PowerEdge R6625, PowerEdge R670, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R760, PowerEdge R760xd2, PowerEdge R760xs, PowerEdge R7615, PowerEdge R7625, PowerEdge R770, PowerEdge R7715, PowerEdge R7725, PowerEdge R840, PowerEdge R860, PowerEdge R940, PowerEdge R940xa, PowerEdge R960, PowerEdge T350, PowerEdge T360, PowerEdge T440, PowerEdge T550, PowerEdge T560, PowerEdge T640 ...
Article Properties
Article Number: 000203805
Article Type: Solution
Last Modified: 12 Jun 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.