SRM 4.8 :: "Used for File (TB)" and "Used for Virtual Storage (TB)" for powerflex set to 0 (hardcoded) in "Usable Capacity by Pool" report

Summary: "Used for File (TB)" and "Used for Virtual Storage (TB)" for powerflex set to 0 (hardcoded) in "Usable Capacity by Pool" report

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Powerflex "Used for File" and "Used for Virtual Storage" shows 0 under the "Explore > All Devices > List of Devices > device > Device Summary > Block Storage CI Summary > Capacity > Usable Capacity by Pool"  report .

Cause

Working as designed.  This is hardcoded to 0 in the inline calculation filter.

inline calculation filter file /opt/APG/Collecting/Inline-Calculation-Filter/emc-scaleio/conf/emc-scaleio-icf.xml has it set to zero directly in the jexl formula.  

<result name="FileUsedCapacity" unit="GB" time-window="900s">
        <input>TotalUsedCapacity</input>
        <group-by>device</group-by>
        <filter><![CDATA[datagrp=='ScaleIO-System']]></filter>
        <jexl-formula><![CDATA[0]]></jexl-formula>
    </result>
    <result name="VirtualUsedCapacity" unit="GB" time-window="900s">
        <input>TotalUsedCapacity</input>
        <group-by>device</group-by>
        <filter><![CDATA[datagrp=='ScaleIO-System']]></filter>
        <jexl-formula><![CDATA[0]]></jexl-formula>
    </result>

 

Resolution

This is working as designed.
  • Used for Virtual Storage is not supported for Dell PowerFlex.
  • ScaleIO 3.x version does not support file capacity.
Article Properties
Article Number: 000217783
Article Type: Solution
Last Modified: 27 Nov 2023
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.