SRM 4.8:: "Used for File (TB)" og "Used for Virtual Storage (TB)" for powerflex set to 0 (hardcoded) i rapporten "Usable Capacity by Pool" (Brukbar kapasitet etter utvalg)

Summary: "Used for File (TB)" og "Used for Virtual Storage (TB)" for powerflex set to 0 (hardcoded) i rapporten "Usable Capacity by Pool" (Brukbar kapasitet etter utvalg)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Powerflex "Used for File" og "Used for Virtual Storage" viser 0 under "Explore [[SDLENTITYREF[gt]] ] All Devices [[SDLENTITYREF[gt]] List of Devices [[SDLENTITYREF[gt]] device [[SDLENTITYREF[gt]] device [[SDLENTITYREF[gt]] device [[SDLENTITYREF]] device [[SDLENTITYREF]] device [[SDLENTITYREF[gt]] device [[SDLENTITYREF]] device [[SDLENTITYREF]] device [[SDLENTITYREF[gt]] device [[SDLENTITYREF[gt]] device [[SDLENTITYREF[gt]] device [[SDLENTITYREF[gt]] device [[SDLENTITYREF[gt][SDLENTITYREF[gt]] Device Summary [[SDLENTITYREF[gt]] Block Storage CI Summary [[SDLENTITYREF[gt]] Capacity [[SDLENTITYREF[gt]] Usable Capacity by Pool"-rapport .

Cause

Fungerer som det skal.  Dette er hardkodet til 0 i det innebygde beregningsfilteret.

inline calculation filter file /opt/APG/Collecting/Inline-Calculation-Filter/emc-scaleio/conf/emc-scaleio-icf.xml has it set to zero directly in the jexl formula (innebygd beregningsfilterfil /opt/APG/Collecting/Inline-Calculation-Filter/emc-scaleio/conf/emc-scaleio-icf.xml) har den satt til null direkte i jexl-formelen.  

<result name="FileUsedCapacity" unit="GB" time-window="900s">
        <input>TotalUsedCapacity</input>
        <group-by>device</group-by>
        <filter><![CDATA[datagrp=='ScaleIO-System']]></filter>
        <jexl-formula><![CDATA[0]]></jexl-formula>
    </result>
    <result name="VirtualUsedCapacity" unit="GB" time-window="900s">
        <input>TotalUsedCapacity</input>
        <group-by>device</group-by>
        <filter><![CDATA[datagrp=='ScaleIO-System']]></filter>
        <jexl-formula><![CDATA[0]]></jexl-formula>
    </result>

 

Resolution

Dette fungerer som det skal.
  • Brukes for virtuell lagring støttes ikke for Dell PowerFlex.
  • ScaleIO 3.x-versjonen støtter ikke filkapasitet.
Article Properties
Article Number: 000217783
Article Type: Solution
Last Modified: 27 Nov 2023
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.