Connectrix: Syslog-doorsturen ingeschakeld, maar niet verzonden naar Splunk-server

Summary: De instellingen auditCfg (--class, --enabled --show) zijn ingeschakeld, maar verzenden geen syslog-informatie naar de Splunk-server.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Het doorsturen van syslog-gegevens is ingeschakeld op de Brocade-switch om deze naar de Splunk-server te verzenden, maar de syslog-informatie wordt niet verzonden.

 

Cause

** SOMEONE SET THE RASLOG QUIET TIME FOR AUDITCFG BACK IN OCT **

Thu Oct 25 06:43:54 2018         admin, , xxx.xx.xx.x, rasadmin --quiet -enable 3
Thu Oct 25 06:44:02 2018         admin, , xxx.xx.xx.x, rasadmin --quiet -show

** HERE IS THE CONFIG FILE FROM non-working **

auditlog.quiettime.dow:FOREVER
auditlog.quiettime.enable:1
auditlog.quiettime.endtime:NA
auditlog.quiettime.starttime:NA
snmp.auditInterval:60
audit.cfg.class:2,4,10
audit.cfg.severity:4

audit.cfg.state:1

*** HERE IS THE CONFIGSHOW FROM working ***

auditlog.quiettime.dow:NA
auditlog.quiettime.enable:0
auditlog.quiettime.endtime:NA
auditlog.quiettime.starttime:NA
snmp.auditInterval:60
audit.cfg.class:2,10
audit.cfg.severity:3
audit.cfg.state:1

 

Resolution

De klant kan de volgende opdracht gebruiken om het doorsturen van syslog naar splunk toe te staan.

rasadmin --quiet -disable 3

 

Affected Products

Connectrix DS-6610B

Products

Connectrix DS-6610B
Article Properties
Article Number: 000057296
Article Type: Solution
Last Modified: 21 Oct 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.