How to access console port of Dell EMC Networking Virtual Edge Platform 1405 Series
Summary: How to access console port of Dell EMC Networking Virtual Edge Platform 1405 Series
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
This article explains how to access console in a Dell EMC Networking VEP1405
The VEP1405 has a dedicated management console on micro-USB port. You can find it in the rear side of the device.
Table of Contents
Physical location of micro-USB console port
Console cable
Driver Software
Console port settings
Physical location of micro-USB console port
Rotate the protection plate to the right. You will see the USB console port
Console cable
VEP1405 ships with a Micro-USB (USB to USB type-A) console cable. Use this to access console port in the rear side.
Driver Software
You can find the driver for USB-UART COM port from below link.
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers 
.
Console port settings
Data rate 115200 baud
Data Bits 8 bits
Stop bits 1
No parity
Affected Products
Dell EMC Networking VEP1425/VEP1445/VEP1485Article Properties
Article Number: 000134440
Article Type: Solution
Last Modified: 21 Feb 2021
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.