ViPR Controller: La creación de volúmenes en VNX falla
Summary: ViPR Controller: La creación de volúmenes en VNX falla
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Este problema se produce después de que los usuarios actualizan el código del entorno operativo VNX a: VNX: 05.33.009.5.217
Este problema también se observó en 05.33.009.5.231 sin la revisión.
El usuario no puede crear un volumen en VNX.
El pedido falla de forma intermitente, pero de forma regular.
El problema persiste después de ejecutar refsys, reiniciar el servidor de SMI-S y reiniciar ECOM.
El volumen permanece en el arreglo después de la falla. Se producirá un error al volver a enviar el pedido con el mismo nombre de volumen.
Error de interfaz de usuario de ViPR Controller
[ERROR] Wed Aug 29 10:58:09 UTC 2018 Error 16000: Mensaje: El trabajo falló: Se detectó una excepción mientras se intentaba actualizar los atributos del volumen:
el objeto solicitado no se puede encontrar. (com.emc.cmp.osls.se.osl.Device.StorDevShow():280 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 L:2 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 No objects of the requested type were found : 2 : 7 : "The device name specified could not be found")
Nota:
Además, consulte el siguiente artículo de la base de conocimientos:
523574 : ViPR Controller: El uso de ViPR Controller de Solutions Enabler 7.6.2.102/SMI-S 4.6.2.30 requiere una https://support.emc.com/kb/523574 de RPQ (artículo de nivel 40)
Cause
Una vez que SMI-S informa que el volumen se creó correctamente, ViPR C le consulta a SMI-S para recopilar información sobre el volumen a fin de actualizar la base de datos de ViPR C. SMI-S no puede proporcionar esta información cuando se le solicita.
Dado que SMI-S no proporciona la información del volumen, la reversión de ViPR Controller no elimina el volumen del arreglo.
Dado que SMI-S no proporciona la información del volumen, la reversión de ViPR Controller no elimina el volumen del arreglo.
Resolution
Resolución:
Después de verificar el error de la interfaz de usuario de ViPR Controller que se muestra en la sección de problemas anterior, abra una solicitud de servicio con Remote Proactive (RCM): Grupo de soporte técnico unificado
para cada VNX que se actualizará en el que se solicita VNX HotFix ManagementServer_1.3.9.1.0306-1.upf (ref. AR 958882), incluida la justificación de la necesidad de la revisión y las versiones
actuales del modelo de arreglo VNX, VNX Block OE, Solutions Enabler, SMI-S y ViPR Controller. Consulte las notas a continuación.
Additional Information
NOTA: Cuando falla la creación de volúmenes, el volumen de back-end se deja en su lugar y deberá eliminarse manualmente del arreglo.
Registros de ViPR C
ViPR C emite un comando para crear volúmenes:
vipr2 vipr2 controllersvc 2018-09-03 14:25:31,763 [1684|createVolumes|39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d] INFO SmisStorageDevice.java (line 226) Create Volume Start - Array:CKM<CLARiiON Serial Number removed>, Pool:CLARIION+CKM<CLARiiON Serial Number removed>+POOL+<Pool Name removed>
Volume:<Volume Name removed> , IsThinlyProvisioned: true
vipr2 vipr2 controllersvc 2018-09-03 14:25:31,776 [1684|createVolumes|39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d] INFO SmisCommandHelper.java (line 201)
SMI-S Provider: <SMI-S Provider FQDN removed> -- Attempting invokeMethod CreateOrModifyElementFromStoragePool on objectPath=/root/emc:Clar_StorageConfigurationService.CreationClassName="Clar_StorageConfigurationService",Name="EMCStorageConfigurationService",SystemCreationClassName="Clar_StorageSystem",SystemName="CLARiiON+CKM<CLARiiON Serial Number removed>" with arguments:
inArg[0]=uint16 ElementType = 5;
inArg[1]=Clar_UnifiedStoragePool ref InPool = "root/emc:Clar_UnifiedStoragePool.InstanceID=\"CLARiiON+CKM<CLARiiON Serial Number removed>+<Pool Name removed>\"";
inArg[2]=uint64 Size = 10737418240;
inArg[3]=uint32 EMCNumberOfDevices = 1;
inArg[4]=string ElementName = "<Volume Name removed>";
inArg[5]=Clar_StoragePoolSetting ref Goal = "root/emc:Clar_StoragePoolSetting.InstanceID=\"CLARiiON+CKM<CLARiiON Serial Number removed>+D+T+3031128139+<Pool Name removed>\"";
Volume:<Volume Name removed> , IsThinlyProvisioned: true
vipr2 vipr2 controllersvc 2018-09-03 14:25:31,776 [1684|createVolumes|39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d] INFO SmisCommandHelper.java (line 201)
SMI-S Provider: <SMI-S Provider FQDN removed> -- Attempting invokeMethod CreateOrModifyElementFromStoragePool on objectPath=/root/emc:Clar_StorageConfigurationService.CreationClassName="Clar_StorageConfigurationService",Name="EMCStorageConfigurationService",SystemCreationClassName="Clar_StorageSystem",SystemName="CLARiiON+CKM<CLARiiON Serial Number removed>" with arguments:
inArg[0]=uint16 ElementType = 5;
inArg[1]=Clar_UnifiedStoragePool ref InPool = "root/emc:Clar_UnifiedStoragePool.InstanceID=\"CLARiiON+CKM<CLARiiON Serial Number removed>+<Pool Name removed>\"";
inArg[2]=uint64 Size = 10737418240;
inArg[3]=uint32 EMCNumberOfDevices = 1;
inArg[4]=string ElementName = "<Volume Name removed>";
inArg[5]=Clar_StoragePoolSetting ref Goal = "root/emc:Clar_StoragePoolSetting.InstanceID=\"CLARiiON+CKM<CLARiiON Serial Number removed>+D+T+3031128139+<Pool Name removed>\"";
..
Returned: 4096 with output arguments:
outArg=uint64 Size = 10737418240;
outArg=SE_ConcreteJob ref Job = "root/emc:SE_ConcreteJob.InstanceID=\"<1234567890>\"";
Execution time: 0.591798 seconds.
Registros de proveedor de SMI-S:
SMI-S recibe el pedido y proporciona un ID concreto.
Returned: 4096 with output arguments:
outArg=uint64 Size = 10737418240;
outArg=SE_ConcreteJob ref Job = "root/emc:SE_ConcreteJob.InstanceID=\"<1234567890>\"";
Execution time: 0.591798 seconds.
Registros de proveedor de SMI-S:
SMI-S recibe el pedido y proporciona un ID concreto.
Mon Sep 03 16:25:29 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 global DEBUG SE_StorageHardwareID.cpp 414 : Almacene el ID del arreglo en el contexto para completar el alcance: NS_CMP_OSLS_SE_ARRAY_FUNC::SE_StorageHardwareID::ContextArrayId
Mon Sep 03 16:25:31 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 StorageConfigurationService.BlockServices DEBUG EMC_StorageConfigurationService.cpp 1887 : Tamaño del elemento: 10737418240
Mon Sep 03 16:25:31 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 global DEBUG 163 : OslCache missing cache entry for array <Array type="CLARiiON" encoding="String" value="CKM<CLARiiON Serial Number removed>" />
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 global INFO Job.cpp 459 : Job <1234567890> Submitted
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 StorageConfigurationService.BlockServices DEBUG EMC_StorageConfigurationService.cpp 2705 : Submit jobId <1234567890> to run asynchronously
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl INFO JobTableMonitor.cpp 61 : Job table monitor started.
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1272031488 JobControl DEBUG JobTableMonitor.cpp 88 : Job table monitor started.
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl DEBUG JobTable.cpp 107 : Se agregó al ID de trabajo de la tabla de trabajos: <1234567890>
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume DEBUG JOB_VolCreate.cpp 400 : Create Storage Volume Job Id:<1234567890>
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl INFO JobControl.cpp 86 : Trabajo iniciado: <1234567890>
Mon Sep 03 16:25:31 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 StorageConfigurationService.BlockServices DEBUG EMC_StorageConfigurationService.cpp 1887 : Tamaño del elemento: 10737418240
Mon Sep 03 16:25:31 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 global DEBUG 163 : OslCache missing cache entry for array <Array type="CLARiiON" encoding="String" value="CKM<CLARiiON Serial Number removed>" />
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 global INFO Job.cpp 459 : Job <1234567890> Submitted
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 StorageConfigurationService.BlockServices DEBUG EMC_StorageConfigurationService.cpp 2705 : Submit jobId <1234567890> to run asynchronously
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl INFO JobTableMonitor.cpp 61 : Job table monitor started.
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1272031488 JobControl DEBUG JobTableMonitor.cpp 88 : Job table monitor started.
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl DEBUG JobTable.cpp 107 : Se agregó al ID de trabajo de la tabla de trabajos: <1234567890>
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume DEBUG JOB_VolCreate.cpp 400 : Create Storage Volume Job Id:<1234567890>
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl INFO JobControl.cpp 86 : Trabajo iniciado: <1234567890>
Registros de SMI-S:
SMI-S informa que se completó la creación de volúmenes:
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume DEBUG JOB_VolCreate.cpp 621 : Completed performImmediateSync().
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume DEBUG JOB_VolCreate.cpp 1891 : Completed performImmediateSync().
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume INFO JOB_VolCreate.cpp 1908 : Volumen creado: <Device name="<DeviceID replaced 12345>" />
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 global INFO Job.cpp 584 : Trabajo marcado al 100 % como completado, ID de trabajo: <1234567890>
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume DEBUG JOB_VolCreate.cpp 1891 : Completed performImmediateSync().
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume INFO JOB_VolCreate.cpp 1908 : Volumen creado: <Device name="<DeviceID replaced 12345>" />
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 global INFO Job.cpp 584 : Trabajo marcado al 100 % como completado, ID de trabajo: <1234567890>
Registros de ViPR:
los registros de ViPR indican que el trabajo de SMI-S se completó:
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,394 [pool-58-thread-1] INFO SmisJob.java (line 178) SmisJob: Búsqueda del trabajo: ID <1234567890>, proveedor: <SMI-S Provider FQDN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 197) Status value[0]: 17
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 197) Status value[1]: 2
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 200) SmisJob: <1234567890> succeeded
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 243) SmisJob: Trabajo posprocesamiento: ID <1234567890>, proveedor: <SMI-S Provider FQDN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 197) Status value[0]: 17
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 197) Status value[1]: 2
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 200) SmisJob: <1234567890> succeeded
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 243) SmisJob: Trabajo posprocesamiento: ID <1234567890>, proveedor: <SMI-S Provider FQDN removed>
Registros de SMI-S:
Una vez que el volumen se ha creado correctamente, ViPR Controller consulta a SMI-S para actualizar la base de datos, pero SMI-S no puede proporcionar detalles sobre el volumen.
Mon Sep 03 16:28:03 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 global DEBUG 307 : StorDevShow() failed with handle="65537", arrayId="<Array type="CLARiiON" encoding="String" value="CKM<CLARiiON Serial Number removed>" />", deviceId="<Device name="<DeviceID replaced 12345>" />", mask="4079755".
Registros de ViPR:
Este error se transmite a ViPR C desde SMI-S y el pedido falla. Dado que no se encontró el volumen cuando se consultó SMI-S, el volumen no se elimina del arreglo en la reversión:
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,081 [pool-58-thread-1] ERROR SmisAbstractCreateVolumeJob.java (line 331) Caught an exception while trying to update attributes for volume <Volume Name removed> (<Volume URN removed>) and volume path //<IP Address removed>/root/emc:Clar_StorageVolume.CreationClassName="Clar_StorageVolume",DeviceID="<DeviceID replaced 12345>",SystemCreationClassName="Clar_StorageSystem",SystemName="CLARiiON+CKM<CLARiiON Serial Number removed>"
WBEMException: CIM_ERR_NOT_FOUND (El objeto solicitado no se puede encontrar. (com.emc.cmp.osls.se.osl.Device.StorDevShow():280 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 L:2 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 No objects of the requested type were found : 2 : 7 : "The device name specified could not be found"))
at org.sblim.cimclient.internal.wbem.CloseableIteratorSAX.hasNext(CloseableIteratorSAX.java:121)
at org.sblim.cimclient.internal.wbem.WBEMClientCIMXML.getIterator(WBEMClientCIMXML.java:2134)
at org.sblim.cimclient.internal.wbem.WBEMClientCIMXML.getInstance(WBEMClientCIMXML.java:1257)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.commonVolumeUpdate(SmisAbstractCreateVolumeJob.java:311)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.processVolume(SmisAbstractCreateVolumeJob.java:219)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.updateStatus(SmisAbstractCreateVolumeJob.java:120)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisJob.poll(SmisJob.java:246)
at com.emc.storageos.volumecontroller.impl.job.QueueJobTracker.run(QueueJobTracker.java:90)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
at java.lang.Thread.run(Thread.java:748)
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,097 [pool-58-thread-1] INFO SmisAbstractCreateVolumeJob.java (line 372) Skipping step addVolumesToConsistencyGroup: volumes [<Volume URN removed>] do not reference a consistency group.
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,097 [pool-58-thread-1] INFO SmisAbstractCreateVolumeJob.java (line 158) Updating status of job 39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d to SUCCESS
Created volume successfully .. NativeId: <DeviceID replaced 12345>, URI: <Volume URN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,101 [pool-58-thread-1] INFO VolumeTaskCompleter.java (line 106) opType: CREATE_BLOCK_VOLUME detail: VolumeCreateFailed:Volume is created.
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,103 [pool-58-thread-1] INFO VolumeTaskCompleter.java (line 82) Bourne VolumeCreateFailed event recorded for Volume <Volume URN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,126 [pool-58-thread-1] INFO WorkflowService.java (line 653) Updating workflow step: 39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d state ERROR : El trabajo falló: Se detectó una excepción mientras se intentaba actualizar los atributos de volumen: El objeto solicitado no se puede encontrar. (com.emc.cmp.osls.se.osl.Device.StorDevShow():280 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 L:2 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 No objects of the requested type were found : 2 : 7 : "The device name specified could not be found")
WBEMException: CIM_ERR_NOT_FOUND (El objeto solicitado no se puede encontrar. (com.emc.cmp.osls.se.osl.Device.StorDevShow():280 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 L:2 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 No objects of the requested type were found : 2 : 7 : "The device name specified could not be found"))
at org.sblim.cimclient.internal.wbem.CloseableIteratorSAX.hasNext(CloseableIteratorSAX.java:121)
at org.sblim.cimclient.internal.wbem.WBEMClientCIMXML.getIterator(WBEMClientCIMXML.java:2134)
at org.sblim.cimclient.internal.wbem.WBEMClientCIMXML.getInstance(WBEMClientCIMXML.java:1257)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.commonVolumeUpdate(SmisAbstractCreateVolumeJob.java:311)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.processVolume(SmisAbstractCreateVolumeJob.java:219)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.updateStatus(SmisAbstractCreateVolumeJob.java:120)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisJob.poll(SmisJob.java:246)
at com.emc.storageos.volumecontroller.impl.job.QueueJobTracker.run(QueueJobTracker.java:90)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
at java.lang.Thread.run(Thread.java:748)
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,097 [pool-58-thread-1] INFO SmisAbstractCreateVolumeJob.java (line 372) Skipping step addVolumesToConsistencyGroup: volumes [<Volume URN removed>] do not reference a consistency group.
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,097 [pool-58-thread-1] INFO SmisAbstractCreateVolumeJob.java (line 158) Updating status of job 39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d to SUCCESS
Created volume successfully .. NativeId: <DeviceID replaced 12345>, URI: <Volume URN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,101 [pool-58-thread-1] INFO VolumeTaskCompleter.java (line 106) opType: CREATE_BLOCK_VOLUME detail: VolumeCreateFailed:Volume is created.
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,103 [pool-58-thread-1] INFO VolumeTaskCompleter.java (line 82) Bourne VolumeCreateFailed event recorded for Volume <Volume URN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,126 [pool-58-thread-1] INFO WorkflowService.java (line 653) Updating workflow step: 39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d state ERROR : El trabajo falló: Se detectó una excepción mientras se intentaba actualizar los atributos de volumen: El objeto solicitado no se puede encontrar. (com.emc.cmp.osls.se.osl.Device.StorDevShow():280 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 L:2 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 No objects of the requested type were found : 2 : 7 : "The device name specified could not be found")
Products
SMI-S Provider, VNX2 SeriesArticle Properties
Article Number: 000167258
Article Type: Solution
Last Modified: 15 Sep 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.