ViPR Controller. Создание тома в VNX завершается сбоем
Summary: ViPR Controller. Создание тома в VNX завершается сбоем
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Эта проблема возникает после модернизации пользователем кода операционной среды VNX до версии VNX. 05.33.009.5.217
Эта проблема также наблюдалась в версии 05.33.009.5.231 без оперативного исправления.
Пользователь не может создать том в VNX.
Заказ периодически завершается сбоем, но регулярно.
Проблема сохраняется после запуска refsys, перезагрузки сервера SMI-S и перезапуска ECOM.
Том остается в массиве после сбоя. Повторная отправка заказа завершится сбоем с использованием того же имени тома.
Ошибка пользовательского интерфейса ViPR Controller
[ERROR] Wed Aug 29 10:58:09 UTC 2018 Error 16000: Сообщение: The job has failed: Caught an exception while trying to update volume attributes:
The requested object cannot be found. (com.emc.cmp.osls.se.osl.Device.StorDevShow():280 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 L:2 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 No objects of the requested type were found : 2 : 7 : "The device name specified could not be found")
Примечание.
См. также следующую статью базы знаний:
523574: ViPR Controller. Для использования Solutions Enabler 7.6.2.102/SMI-S 4.6.2.30 ViPR Controller требуется RPQ https://support.emc.com/kb/523574 (статья уровня 40)
Cause
После того как SMI-S сообщает об успешном создании тома, ViPR C запрашивает SMI-S для сбора информации о томе с целью обновления базы данных ViPR C. SMI-S не может предоставить эту информацию по запросу.
Поскольку SMI-S не предоставляет информацию о томе, откат ViPR Controller не удаляет том из массива.
Поскольку SMI-S не предоставляет информацию о томе, откат ViPR Controller не удаляет том из массива.
Resolution
Решение.
После проверки ошибки пользовательского интерфейса ViPR Controller, указанной в разделе «Проблема» выше, откройте сервисную заявку в группе Remote Proactive (RCM): Unified Technical Support
для каждой системы VNX, подлежащей модернизации, с запросом на установку оперативного исправления VNX ManagementServer_1.3.9.1.0306-1.upf (ref. AR 958882), указав обоснование необходимости оперативного исправления и
текущие версии модели массива VNX, блочной операционной среды VNX, Solutions Enabler, SMI-S и ViPR Controller. См. примечания ниже.
Additional Information
ПРИМЕЧАНИЕ. При сбое создания тома внутренний том остается на месте и его необходимо удалить из массива вручную.
Журналы ViPR C
ViPR C отправляет команду для создания тома:
vipr2 vipr2 controllersvc 2018-09-03 14:25:31,763 [1684|createVolumes|39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d] INFO SmisStorageDevice.java (line 226) Create Volume Start - Array:CKM<CLARiiON Serial Number removed>, Pool:CLARIION+CKM<CLARiiON Serial Number removed>+POOL+<Pool Name removed>
Volume:<Volume Name removed> , IsThinlyProvisioned: true
vipr2 vipr2 controllersvc 2018-09-03 14:25:31,776 [1684|createVolumes|39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d] INFO SmisCommandHelper.java (line 201)
SMI-S Provider: <SMI-S Provider FQDN removed> -- Attempting invokeMethod CreateOrModifyElementFromStoragePool on objectPath=/root/emc:Clar_StorageConfigurationService.CreationClassName="Clar_StorageConfigurationService",Name="EMCStorageConfigurationService",SystemCreationClassName="Clar_StorageSystem",SystemName="CLARiiON+CKM<CLARiiON Serial Number removed>" with arguments:
inArg[0]=uint16 ElementType = 5;
inArg[1]=Clar_UnifiedStoragePool ref InPool = "root/emc:Clar_UnifiedStoragePool.InstanceID=\"CLARiiON+CKM<CLARiiON Serial Number removed>+<Pool Name removed>\"";
inArg[2]=uint64 Size = 10737418240;
inArg[3]=uint32 EMCNumberOfDevices = 1;
inArg[4]=string ElementName = "<Volume Name removed>";
inArg[5]=Clar_StoragePoolSetting ref Goal = "root/emc:Clar_StoragePoolSetting.InstanceID=\"CLARiiON+CKM<CLARiiON Serial Number removed>+D+T+3031128139+<Pool Name removed>\"";
Volume:<Volume Name removed> , IsThinlyProvisioned: true
vipr2 vipr2 controllersvc 2018-09-03 14:25:31,776 [1684|createVolumes|39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d] INFO SmisCommandHelper.java (line 201)
SMI-S Provider: <SMI-S Provider FQDN removed> -- Attempting invokeMethod CreateOrModifyElementFromStoragePool on objectPath=/root/emc:Clar_StorageConfigurationService.CreationClassName="Clar_StorageConfigurationService",Name="EMCStorageConfigurationService",SystemCreationClassName="Clar_StorageSystem",SystemName="CLARiiON+CKM<CLARiiON Serial Number removed>" with arguments:
inArg[0]=uint16 ElementType = 5;
inArg[1]=Clar_UnifiedStoragePool ref InPool = "root/emc:Clar_UnifiedStoragePool.InstanceID=\"CLARiiON+CKM<CLARiiON Serial Number removed>+<Pool Name removed>\"";
inArg[2]=uint64 Size = 10737418240;
inArg[3]=uint32 EMCNumberOfDevices = 1;
inArg[4]=string ElementName = "<Volume Name removed>";
inArg[5]=Clar_StoragePoolSetting ref Goal = "root/emc:Clar_StoragePoolSetting.InstanceID=\"CLARiiON+CKM<CLARiiON Serial Number removed>+D+T+3031128139+<Pool Name removed>\"";
..
Returned: 4096 with output arguments:
outArg=uint64 Size = 10737418240;
outArg=SE_ConcreteJob ref Job = "root/emc:SE_ConcreteJob.InstanceID=\"<1234567890>\"";
Execution time: 0.591798 seconds.
Журналы поставщика SMI-S
SMI-S получает заказ и предоставляет конкретный идентификатор.
Returned: 4096 with output arguments:
outArg=uint64 Size = 10737418240;
outArg=SE_ConcreteJob ref Job = "root/emc:SE_ConcreteJob.InstanceID=\"<1234567890>\"";
Execution time: 0.591798 seconds.
Журналы поставщика SMI-S
SMI-S получает заказ и предоставляет конкретный идентификатор.
Mon Sep 03 16:25:29 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 global DEBUG SE_StorageHardwareID.cpp 414 : Store the array id in the context to scope populate: NS_CMP_OSLS_SE_ARRAY_FUNC::SE_StorageHardwareID::ContextArrayId
Mon Sep 03 16:25:31 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 StorageConfigurationService.BlockServices DEBUG EMC_StorageConfigurationService.cpp 1887 : Element size: 10737418240
Mon Sep 03 16:25:31 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 global DEBUG 163 : OslCache missing cache entry for array <Array type="CLARiiON" encoding="String" value="CKM<CLARiiON Serial Number removed>" />
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 global INFO Job.cpp 459 : Job <1234567890> Submitted
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 StorageConfigurationService.BlockServices DEBUG EMC_StorageConfigurationService.cpp 2705 : Submit jobId <1234567890> to run asynchronously
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl INFO JobTableMonitor.cpp 61 : Job table monitor started.
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1272031488 JobControl DEBUG JobTableMonitor.cpp 88 : Job table monitor started.
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl DEBUG JobTable.cpp 107 : Added to job table job id: <1234567890>
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume DEBUG JOB_VolCreate.cpp 400 : Create Storage Volume Job Id:<1234567890>
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl INFO JobControl.cpp 86 : Started job: <1234567890>
Mon Sep 03 16:25:31 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 StorageConfigurationService.BlockServices DEBUG EMC_StorageConfigurationService.cpp 1887 : Element size: 10737418240
Mon Sep 03 16:25:31 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 global DEBUG 163 : OslCache missing cache entry for array <Array type="CLARiiON" encoding="String" value="CKM<CLARiiON Serial Number removed>" />
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 global INFO Job.cpp 459 : Job <1234567890> Submitted
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 StorageConfigurationService.BlockServices DEBUG EMC_StorageConfigurationService.cpp 2705 : Submit jobId <1234567890> to run asynchronously
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl INFO JobTableMonitor.cpp 61 : Job table monitor started.
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1272031488 JobControl DEBUG JobTableMonitor.cpp 88 : Job table monitor started.
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl DEBUG JobTable.cpp 107 : Added to job table job id: <1234567890>
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume DEBUG JOB_VolCreate.cpp 400 : Create Storage Volume Job Id:<1234567890>
Mon Sep 03 16:25:32 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 2013263616 JobControl INFO JobControl.cpp 86 : Started job: <1234567890>
Журналы SMI-S
SMI-S сообщает, что создание тома завершено.
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume DEBUG JOB_VolCreate.cpp 621 : Completed performImmediateSync().
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume DEBUG JOB_VolCreate.cpp 1891 : Completed performImmediateSync().
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume INFO JOB_VolCreate.cpp 1908 : Created volume: <Device name="<DeviceID replaced 12345>" />
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 global INFO Job.cpp 584 : Marked job 100% completed, Job id: <1234567890>
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume DEBUG JOB_VolCreate.cpp 1891 : Completed performImmediateSync().
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 BlockServices.JobControlVolume INFO JOB_VolCreate.cpp 1908 : Created volume: <Device name="<DeviceID replaced 12345>" />
Mon Sep 03 16:28:02 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 global INFO Job.cpp 584 : Marked job 100% completed, Job id: <1234567890>
Журналы ViPR
Журналы ViPR указывают, что задание SMI-S завершено.
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,394 [pool-58-thread-1] INFO SmisJob.java (line 178) SmisJob: Looking up job: id <1234567890>, provider: <SMI-S Provider FQDN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 197) Status value[0]: 17
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 197) Status value[1]: 2
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 200) SmisJob: <1234567890> succeeded
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 243) SmisJob: Post processing job: id <1234567890>, provider: <SMI-S Provider FQDN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 197) Status value[0]: 17
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 197) Status value[1]: 2
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 200) SmisJob: <1234567890> succeeded
vipr2 vipr2 controllersvc 2018-09-03 14:28:02,413 [pool-58-thread-1] INFO SmisJob.java (line 243) SmisJob: Post processing job: id <1234567890>, provider: <SMI-S Provider FQDN removed>
Журналы SMI-S
После успешного создания тома ViPR Controller запрашивает SMI-S для обновления базы данных, но SMI-S не может предоставить сведения о томе.
Mon Sep 03 16:28:03 +0200 2018 <SMI-S Provider Name removed> ECOM 26037 -1269930240 global DEBUG 307 : StorDevShow() failed with handle="65537", arrayId="<Array type="CLARiiON" encoding="String" value="CKM<CLARiiON Serial Number removed>" />", deviceId="<Device name="<DeviceID replaced 12345>" />", mask="4079755".
Журналы ViPR
Эта ошибка передается в ViPR C из SMI-S, и заказ завершается сбоем. Поскольку том не был найден при запросе SMI-S, том не удаляется из массива при откате.
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,081 [pool-58-thread-1] ERROR SmisAbstractCreateVolumeJob.java (line 331) Caught an exception while trying to update attributes for volume <Volume Name removed> (<Volume URN removed>) and volume path //<IP Address removed>/root/emc:Clar_StorageVolume.CreationClassName="Clar_StorageVolume",DeviceID="<DeviceID replaced 12345>",SystemCreationClassName="Clar_StorageSystem",SystemName="CLARiiON+CKM<CLARiiON Serial Number removed>"
WBEMException: CIM_ERR_NOT_FOUND (The requested object cannot be found. (com.emc.cmp.osls.se.osl.Device.StorDevShow():280 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 L:2 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 No objects of the requested type were found : 2 : 7 : "The device name specified could not be found"))
at org.sblim.cimclient.internal.wbem.CloseableIteratorSAX.hasNext(CloseableIteratorSAX.java:121)
at org.sblim.cimclient.internal.wbem.WBEMClientCIMXML.getIterator(WBEMClientCIMXML.java:2134)
at org.sblim.cimclient.internal.wbem.WBEMClientCIMXML.getInstance(WBEMClientCIMXML.java:1257)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.commonVolumeUpdate(SmisAbstractCreateVolumeJob.java:311)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.processVolume(SmisAbstractCreateVolumeJob.java:219)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.updateStatus(SmisAbstractCreateVolumeJob.java:120)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisJob.poll(SmisJob.java:246)
at com.emc.storageos.volumecontroller.impl.job.QueueJobTracker.run(QueueJobTracker.java:90)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
at java.lang.Thread.run(Thread.java:748)
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,097 [pool-58-thread-1] INFO SmisAbstractCreateVolumeJob.java (line 372) Skipping step addVolumesToConsistencyGroup: volumes [<Volume URN removed>] do not reference a consistency group.
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,097 [pool-58-thread-1] INFO SmisAbstractCreateVolumeJob.java (line 158) Updating status of job 39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d to SUCCESS
Created volume successfully .. NativeId: <DeviceID replaced 12345>, URI: <Volume URN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,101 [pool-58-thread-1] INFO VolumeTaskCompleter.java (line 106) opType: CREATE_BLOCK_VOLUME detail: VolumeCreateFailed:Volume is created.
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,103 [pool-58-thread-1] INFO VolumeTaskCompleter.java (line 82) Bourne VolumeCreateFailed event recorded for Volume <Volume URN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,126 [pool-58-thread-1] INFO WorkflowService.java (line 653) Updating workflow step: 39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d state ERROR : The job has failed: Caught an exception while trying to update volume attributes: The requested object cannot be found. (com.emc.cmp.osls.se.osl.Device.StorDevShow():280 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 L:2 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 No objects of the requested type were found : 2 : 7 : "The device name specified could not be found")
WBEMException: CIM_ERR_NOT_FOUND (The requested object cannot be found. (com.emc.cmp.osls.se.osl.Device.StorDevShow():280 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 L:2 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 No objects of the requested type were found : 2 : 7 : "The device name specified could not be found"))
at org.sblim.cimclient.internal.wbem.CloseableIteratorSAX.hasNext(CloseableIteratorSAX.java:121)
at org.sblim.cimclient.internal.wbem.WBEMClientCIMXML.getIterator(WBEMClientCIMXML.java:2134)
at org.sblim.cimclient.internal.wbem.WBEMClientCIMXML.getInstance(WBEMClientCIMXML.java:1257)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.commonVolumeUpdate(SmisAbstractCreateVolumeJob.java:311)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.processVolume(SmisAbstractCreateVolumeJob.java:219)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisAbstractCreateVolumeJob.updateStatus(SmisAbstractCreateVolumeJob.java:120)
at com.emc.storageos.volumecontroller.impl.smis.job.SmisJob.poll(SmisJob.java:246)
at com.emc.storageos.volumecontroller.impl.job.QueueJobTracker.run(QueueJobTracker.java:90)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
at java.lang.Thread.run(Thread.java:748)
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,097 [pool-58-thread-1] INFO SmisAbstractCreateVolumeJob.java (line 372) Skipping step addVolumesToConsistencyGroup: volumes [<Volume URN removed>] do not reference a consistency group.
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,097 [pool-58-thread-1] INFO SmisAbstractCreateVolumeJob.java (line 158) Updating status of job 39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d to SUCCESS
Created volume successfully .. NativeId: <DeviceID replaced 12345>, URI: <Volume URN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,101 [pool-58-thread-1] INFO VolumeTaskCompleter.java (line 106) opType: CREATE_BLOCK_VOLUME detail: VolumeCreateFailed:Volume is created.
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,103 [pool-58-thread-1] INFO VolumeTaskCompleter.java (line 82) Bourne VolumeCreateFailed event recorded for Volume <Volume URN removed>
vipr2 vipr2 controllersvc 2018-09-03 14:28:03,126 [pool-58-thread-1] INFO WorkflowService.java (line 653) Updating workflow step: 39a39976-b004-45e9-98c7-f1e463d25517c83c9b0f-fe18-485b-85c3-cdd8b25f2a8d state ERROR : The job has failed: Caught an exception while trying to update volume attributes: The requested object cannot be found. (com.emc.cmp.osls.se.osl.Device.StorDevShow():280 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 L:2 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_NOT_FOUND R:1000052 No objects of the requested type were found : 2 : 7 : "The device name specified could not be found")
Products
SMI-S Provider, VNX2 SeriesArticle Properties
Article Number: 000167258
Article Type: Solution
Last Modified: 15 Sep 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.