MFE SCF: Diagnostic: Valid SCRATCH EXIT Commands

Summary: Demonstrating the valid SCRATCH EXIT commands.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

In order to display the Global SCRATCH EXIT settings, use ResourcePak Symmetrix Control Facility (SCF) started task name in the following command.

F <scfstc>,SRX, D G

An example of the output is displayed in the below statement. The following is a display of the Global SCRATCH EXIT settings. The "ESF$PRE0" statement shows where the load module is loaded in storage and the second value is the location of the CSECT. If the exit says it is enabled, the EXIT is enabled and if it says disabled, the EXIT is disabled.

SCF4303I SRX D G
SCF4337I SRX DIAGNOSTIC DISPLAY: 156
SRX GLOBAL @1759E2C8, ESFSHOOK @1759F2C8, CMNAREA @1759E650
  VERSION=730, GLOBALVL=SF73021, PTFLVL=SF73021
  ADDR=1759E2C8, ADDR_LOADPOINT=17590000, LENGTH=00018010
  SAS_SASECSA@=1969F6B8, SAS_SCF_NAME=DS73, FLAGS=00020020
  TEID=00000000, TFID=00000000
  ATTNTBL=1758DE88, ATTNTBL_LP=1758D000, ATTNTBL_LENGTH=00002758
  DWA@=175A8800/00028D00
  DEBUG=0000000000000000
ATTENTION TABLE @1758DE88
  ATTNTID=$ATTNTBL
  ATTNMSGI ANCHOR=00000000, FIRST=00000000, LAST=00000000
           COUNT=0
           HASHT=1758DF80, HASHNDX=00, HASHF=00, HASHCNT=1021
  ATTNTLCK=00000000, ATTNTOKN=00000000, ATTNTRTN=1758EF78
  ATTNTFLG=80000000
COMMON SERVICE ROUTINES @1759EB8C
  EMCCSCAN @17590000
  ESFHIOMO @175A76D0
  ESFHIOTR @175A7988
  ESFHIOCM @175A7078
INTERFACE TABLE @1759E2D0, COUNT=8
  CVAFTBL INTERFACE (TYPE 007 @ 1759E2D0) IMPLANTED :
    ECMHHP07 @ 16FBF000/96FBF7E8, LN=00001740
    ESF$PRE0 @ 00CBC000/80CBCC18, LN=000025C8
               ABCNT=0, OINT=80CC0C18, PINT=80CC0C18, ENABLED
  DDT INTERFACE (TYPE 001 @ 1759E340) IMPLANTED :
    ECMHHP01 @ 1758B000/9758B000, LN=000019A0
    ESFHDDT  @ 17587000/97587E28, LN=00003238
               ESFHSIO  @ 17587ED8, ABCNT=0, ENABLED
               ESFHTRAP @ 17589A18, ABCNT=0, ENABLED
SCF4304I SRX DISPLAY COMMAND COMPLETED.
Article Properties
Article Number: 000010110
Article Type: How To
Last Modified: 02 Jul 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.