PowerVault ME5:无法将启动器添加到主机

Summary: 无法使用 PowerVault Manager 将新的主机启动器全球通用名称 (WWN) 端口映射到现有映射主机。 使用 PowerVault ME 命令行界面 (CLI) 改为添加启动器。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

在为现有映射主机更新 PowerVault Manager 中的主机映射时,可能会遇到这种情况。
尝试将第二个启动器 WWN 或主机添加到现有映射的 WWN 或主机时,可能会收到一条消息,指示无法添加新启动器,因为它没有相同的卷映射。



复制步骤供参考:
管理员的主机具有两个或更多启动器端口,但仅选择一个启动器(例如 Initiator0002),并将卷映射到主机。

主机


尝试将发送启动器(例如 Initiator0001)添加到现有主机(例如 R740),并收到以下消息 “Failed to add initiators to the host.The mappings of the initiator are inconsistent with the mappings of the host.启动器无法添加到主机。”

 

主机
Failure
 
 
 

Cause

PowerVault Manager 仅允许将卷映射到主机和主机组。 

PowerVault Manager 不支持将卷映射到启动器。 

此“将卷映射到启动器”的操作仅可使用 PowerVault ME 命令行界面 (CLI)

Resolution

使用 PuTTY 等终端应用程序打开与任一控制器管理 IP 地址的 SSH 会话。   如果您不熟悉命令语法类型:  help, help show initiator or help map,将显示语法和参数。


使用 CLI 命令“映射卷”将第二个启动器 WWN 添加到映射的主机,而不会出现任何错误。
 

# show initiators
Nickname       Discovered Mapped Profile  Host Type  ID
-----------------------------------------------------------------------
initiator0001  Yes        No     Standard SAS        54cd98f05a2fb900
initiator0002  Yes        Yes    Standard SAS        54cd98f05a2fb901
-----------------------------------------------------------------------
Success: Command completed successfully.



 

# map volume access read-write initiator initiator0001 lun 0 Test
Info: Mapping succeeded. Initiator 54cd98f05a2fb900 was mapped for volume Test with LUN 0. (Test)
Success: Command completed successfully. (Test) - Mapping succeeded. Initiator 54cd98f05a2fb900 was mapped for volume Test with LUN 0.



 

# show initiators
Nickname       Discovered Mapped Profile  Host Type  ID
-----------------------------------------------------------------------
initiator0001  Yes        Yes    Standard SAS        54cd98f05a2fb900
initiator0002  Yes        Yes    Standard SAS        54cd98f05a2fb901
-----------------------------------------------------------------------
Success: Command completed successfully.

 

 

之后,更改将反映在 PowerVault Manager 中。

 

主机

 

成功信息

 

首次在 PowerVault Manager 中创建主机时,管理员应映射两个端口 WWN。

 

Additional Information

N/A

Videos

N/A

Affected Products

ME Series, PowerVault ME5012, PowerVault ME5024, PowerVault ME5084
Article Properties
Article Number: 000200432
Article Type: Solution
Last Modified: 24 May 2023
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.