PowerFlex: PDU의 NMC 모듈 교체 프로세스
Summary: Panduit PDU에서 NMC 모듈을 교체하는 방법 이 KB는 G5 및 G6 모델에 적용됩니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
PDU에서 NMC 모듈 교체
NMC 모듈 교체 전 문제 해결:
NMC 모듈(네트워크 모듈 컨트롤러/PDU 컨트롤러/리본 케이블이라고도 함)을 다시 장착합니다.
작동하지 않는 PDU의 작동 중인 PDU에서 NMC 모듈을 교체/테스트해 봅니다(두 PDU 모두 모델이 동일해야 함).
NMC 모듈은 핫 스왑이 가능합니다. 따라서 PDU는 다운되지 않으며 NMC 모듈을 교체, 재장착 또는 교체할 때 환경의 어떤 것도 영향을 받지 않습니다. https://www.panduit.com/content/dam/panduit/en/products/media/6/16/416/8416/111458416.pdf (9페이지)
CE용 PDU NMC 모듈 교체 문서(현장 엔지니어)
https://www.panduit.com/content/dam/panduit/en/products/media/6/16/416/8416/111458416.pdf (페이지 129-130)
Additional Information
https://www.panduit.com/content/dam/panduit/en/products/media/6/16/416/8416/111458416.pdf (페이지 129-130)
Affected Products
VxBlock and Vblock Systems, PowerFlex rack, ScaleIOArticle Properties
Article Number: 000333058
Article Type: How To
Last Modified: 06 Nov 2025
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.