Dell Unity: How to run or download Config Capture to HTML Format (User Correctable)

Summary: This KB article shows how to run the array configuration capture and download it in user readable HTML Format.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

From ssh session:

SSH to the array and log in with the "service" user/password, then run the below command:

spb:~> svc_arrayconfig -H (this may take a couple of minutes to return the name of the template file)
/EMC/backend/service/configuration_history/20170302_235811_Array SN_EMC-UEM-Telemetry.html

How to download this file to UEMCLI Client:
From a Windows machine where the UEMCLI client is installed, use the below mentioned command: 
C:\Users\Administrator>uemcli -d <ip> -u service -p <servicepasswd> -noHeader -download config

Output: Downloaded 181.04 KB of 181.04 KB [ 100.0% ] at 146.95 KB/s
Operation completed successfully


You can then view the file on any browser (in the folder where you run the command from).

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family , Dell EMC Unity Hybrid ...
Article Properties
Article Number: 000019227
Article Type: How To
Last Modified: 11 Apr 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.