PowerPath for Windows: PowerPath에서 이벤트 4 - 소스: Powerpath - EMC Powerpath 오류: MPAPI : 오류: 내부 오류가 발생했습니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
PowerPath for Windows
PowerPath에서 이벤트 4 - 소스: Powerpath - EMC PowerPath 오류: MPAPI : 오류: 내부 오류가 발생했습니다.
이 이벤트는 Windows 이벤트 뷰어에서 매시간 보고됩니다.
이 이벤트는 매시간 보고되지만 PowerPath 및 클러스터 기능에는 문제가 발생하지 않습니다.
이 이벤트는 PowerPath를 5.5에서 5.7 SP2로 업그레이드한 후 발생하기 시작했습니다.
Cause
MPAPI용 클라이언트는 Powermt, 호스트 에이전트 서비스이며 Powermig 서비스는 이벤트 뷰어에서 이벤트를 발생시킵니다.
Resolution
자동 호스트 등록 기능을 비활성화하고 문제가 해결되었는지 확인합니다.
자동 호스트 등록을 비활성화하려면 PowerPath 버전이 5.7 SP4 이하인 경우 CLI를 사용하여 PowerPath 설치를 복구합니다.
C:\EMCPower.X64.signed.5.7.SP2.bxxx.exe /s /v"/L*v C:\logs\PPrepair.log REINSTALL=ALL AUTO_HOST_REGISTRATION=0 NO_REBOOT=1"
PowerPath 6.0에서는 powermt 명령을 사용하여 자동 호스트 등록을 비활성화할 수 있습니다.
문제가 계속되면 업그레이드 중에 DLL의 일관성이 저하될 가능성이 있으며 PowerPath 6.0에서는 이 문제가 발생하지 않으므로 PowerPath를 6.0 이상으로 업그레이드하십시오.
자동 호스트 등록을 비활성화하려면 PowerPath 버전이 5.7 SP4 이하인 경우 CLI를 사용하여 PowerPath 설치를 복구합니다.
C:\EMCPower.X64.signed.5.7.SP2.bxxx.exe /s /v"/L*v C:\logs\PPrepair.log REINSTALL=ALL AUTO_HOST_REGISTRATION=0 NO_REBOOT=1"
PowerPath 6.0에서는 powermt 명령을 사용하여 자동 호스트 등록을 비활성화할 수 있습니다.
powermt set auto_host_registration={on|off}
문제가 계속되면 업그레이드 중에 DLL의 일관성이 저하될 가능성이 있으며 PowerPath 6.0에서는 이 문제가 발생하지 않으므로 PowerPath를 6.0 이상으로 업그레이드하십시오.
Additional Information
OPT 467881 참조하십시오.
Affected Products
Storage NetworkingArticle Properties
Article Number: 000055944
Article Type: Solution
Last Modified: 10 Dec 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.