Connectrix: El reenvío del registro del sistema está habilitado, pero no se envía al servidor de Splunk

Summary: Los ajustes de auditCfg (--class, --enabled --show) están habilitados; sin embargo, no envían información de syslog al servidor de Splunk.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Se habilitó el reenvío del registro del sistema en el switch Brocade para que se envíe al servidor Splunk; sin embargo, la información del registro del sistema no se envía.

 

Cause

** SOMEONE SET THE RASLOG QUIET TIME FOR AUDITCFG BACK IN OCT **

Thu Oct 25 06:43:54 2018         admin, , xxx.xx.xx.x, rasadmin --quiet -enable 3
Thu Oct 25 06:44:02 2018         admin, , xxx.xx.xx.x, rasadmin --quiet -show

** HERE IS THE CONFIG FILE FROM non-working **

auditlog.quiettime.dow:FOREVER
auditlog.quiettime.enable:1
auditlog.quiettime.endtime:NA
auditlog.quiettime.starttime:NA
snmp.auditInterval:60
audit.cfg.class:2,4,10
audit.cfg.severity:4

audit.cfg.state:1

*** HERE IS THE CONFIGSHOW FROM working ***

auditlog.quiettime.dow:NA
auditlog.quiettime.enable:0
auditlog.quiettime.endtime:NA
auditlog.quiettime.starttime:NA
snmp.auditInterval:60
audit.cfg.class:2,10
audit.cfg.severity:3
audit.cfg.state:1

 

Resolution

El cliente puede utilizar el siguiente comando para permitir el reenvío del registro del sistema a splunk.

rasadmin --quiet -disable 3

 

Affected Products

Connectrix DS-6610B

Products

Connectrix DS-6610B
Article Properties
Article Number: 000057296
Article Type: Solution
Last Modified: 21 Oct 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.