PowerEdge: Linux 기반 운영 체제에 HBA355i 드라이버를 설치한 후 오류 로그가 발견되었습니다.
Summary: Linux 기반 운영 체제에서 구성 12x3.5 + 4x2.5(SAS/SATA)로 HBA355i 드라이버(SWB:VVM42 - 버전 34.15.04.00)를 설치한 후 오류 로그 발견
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
HBA 355i 드라이버 SWB를 설치한 후 OS 로그에 오류 메시지가 기록됩니다. 듀얼 백플레인(전면 및 후면 BP)이 있는 Linux 기반 운영 체제의 VVM42(버전 34.15.04.00)
내부 dmesg에 다음과 같은 오류 메시지가 표시될 수 있습니다.
mpt3sas_com0: failure at /home/abuild/rpmbuild/BUILD/lsi-mpt3sas-34.15.04.00/obj/default/mpt3sas_transport.c:868/mpt3sas_transport_port_add()!
기능적 영향에 대해 말하자면, SES 관리는 OS 공급업체에서 제공하는 툴/유틸리티를 사용하여 OS에 등록되지 않은 백플레인에서는 가능한 작업이 아닙니다.
(예: smp_utils 등) 자주 사용되는 것으로 여겨지는 기본 OS 명령 예: lsblk, fdisk, parted 등은 영향을 받지 않습니다. IO 작업 및 드라이브 열거는 영향을 받지 않습니다.
Cause
이 문제는 특정 조건(디바이스 추가를 위한 이벤트 생성 타이밍 관련)에서 Linux 드라이버 버전 34.15.04.00 이 두 번째 백플레인을 OS에 등록할 수 없다는 것입니다.
이 오류 메시지는 부팅 시 기록되지만 타이밍 문제인 것 같습니다.
Resolution
이는 보고 동작이며 기능적 영향이 아닙니다.
모든 정보는 다음과 같은 OS 도구에서 확인할 수 있습니다(lsscsi, lslk, sg_utils)과 OMSA, PERCLI 등과 같은 Dell 유틸리티를 통해 서비스를 받을 수 있습니다.
HBA 355i 드라이버를 최신 버전으로 업데이트합니다.
Affected Products
PERC9/SAS HBAs, HBA355, PowerEdge R650, PowerEdge R650xs, PowerEdge R6515, PowerEdge R6525, PowerEdge R660, PowerEdge R660xs, PowerEdge R6615, PowerEdge R6625, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525
, PowerEdge R760, PowerEdge R760XA, PowerEdge R760xd2, PowerEdge R760xs, PowerEdge R7615, PowerEdge R7625, PowerEdge R860, PowerEdge R960
...
Article Properties
Article Number: 000185395
Article Type: Solution
Last Modified: 17 Apr 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.