Dell Networking OS10 How to disable system command
Resumen: This article explains how to disable the use of the "system" command.
Este artículo se aplica a
Este artículo no se aplica a
Este artículo no está vinculado a ningún producto específico.
No se identifican todas las versiones del producto en este artículo.
Instrucciones
In Dell Networking OS10, the LINUX system commands can be accessed by using the system command.
By default it is enabled. It can be disabled using system-cli disable.
Be aware that:
Disabling system-cli does not disable the linuxadmin account.
Use system-user linuxadmin disable to disable it.
The following document includes recommendations for securing switches that run Dell SmartFabric OS10.
Dell SmartFabric OS10 and SmartFabric Services Security Configuration Guide December 2022
By default it is enabled. It can be disabled using system-cli disable.
Command syntax
| Command | Explanation |
|---|---|
| OS10# configure terminal | Enter Configure mode |
| OS10(config)# system-cli disable | Disable system command |
| OS10(config)# no system-cli disable | Enable system command |
Sample Output
When system cli is enabled (Default)
-------------------------------
OS10#
OS10# system bash
admin@OS10:/home/admin$
admin@OS10:/home/admin$ exit
OS10#
Disabling system cli
-----------------------
OS10#
OS10# configure terminal
OS10(config)# system-cli disable
OS10(config)# exit
OS10#
When system cli is disabled
-------------------------------
OS10#
OS10# system bash
% Error: Unrecognized command.
OS10#
Be aware that:
Disabling system-cli does not disable the linuxadmin account.
Use system-user linuxadmin disable to disable it.
OS10# configure terminal OS10(config)# system-user linuxadmin disable
The following document includes recommendations for securing switches that run Dell SmartFabric OS10.
Dell SmartFabric OS10 and SmartFabric Services Security Configuration Guide December 2022
Productos afectados
Dell EMC Networking N3200-ON, PowerSwitch S4112F-ON/S4112T-ON, PowerSwitch S4128F-ON/S4128T-ON, PowerSwitch S4148F-ON/S4148T-ON/S4148FE-ON, PowerSwitch S4148U-ON, PowerSwitch S4248FB-ON /S4248FBL-ON, PowerSwitch S5212F-ON, PowerSwitch S5224F-ON
, PowerSwitch S5232F-ON, PowerSwitch S5248F-ON, PowerSwitch S5296F-ON, PowerSwitch Z9100-ON, PowerSwitch Z9264F-ON, PowerSwitch Z9332F-ON, PowerSwitch Z9432F-ON, PowerScale Switch S4112F, PowerScale Switch S4148F, PowerScale Switch S5232F, PowerScale Switch Z9100, PowerScale Switch Z9264, SmartFabric OS10 Software
...
Propiedades del artículo
Número del artículo: 000214216
Tipo de artículo: How To
Última modificación: 02 oct 2023
Versión: 2
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.