Dell EMC Unity: failure to enable Support Assist with Secure Connection Gateway [User Correctable]
Resumen: After an upgrade to 5.3, Support Assist with SCG (Gateway Server) can't be enabled.
Este artículo se aplica a
Este artículo no se aplica a
Este artículo no está vinculado a ningún producto específico.
No se identifican todas las versiones del producto en este artículo.
Síntomas
After an upgrade to 5.3, Support Assist with SCG (Gateway Server) can't be enabled. The following error is seen:
The cemtracer_emcsupport.log show the following errors:
When trying to disable connecthome manually, the following error is seen:
There is no "from" email address configured:
Operation failed. Error code: 0x6400bee
Failed to perform the operation because connect home has not been configured. (Error Code:0x6400bee)
Failed to perform the operation because connect home has not been configured. (Error Code:0x6400bee)
The cemtracer_emcsupport.log show the following errors:
15 Jun 2023 13:16:23 - [EmcSupportServices] ERROR - {0:3108967:253371764}[15936|29716|d63ffb40][ExecuteSvcScript @ ../../../components/providers/osls/EmcSupportServices/src/EMC_UEM_EmcSupportServiceLeaf.cpp:2543] Non OK return code 5 and output from running svc_connectemc --getconfig
15 Jun 2023 13:21:13 - [EmcSupportServices] ERROR - {1:3109257:859694766}[15936|31306|d87ffb40][ExecuteSvcScript @ ../../../components/providers/osls/EmcSupportServices/src/EMC_UEM_EmcSupportServiceLeaf.cpp:2543] Non OK return code 5 and outputINFO [spa]: Verifying peer connectivity ...
from running svc_connectemc --disable --nodbupdate
When trying to disable connecthome manually, the following error is seen:
svc_connectemc --disable --nodbupdate INFO [spa]: Verifying peer connectivity ... ERROR [spa]: Email (ConnectEMC) not configured.
There is no "from" email address configured:
uemcli /sys/support/connecthome show -detail Storage system address: 127.0.0.1 Storage system port: 443 HTTPS connection 1: Enabled = yes SMTP server = xxx.xxx.xxx.xxx E-mail from address = (none)@emc.com <-- here E-mail to address = emailalert@emc.com
Causa
In order to enable Support Assist in 5.3, connectemc needs to have a "from" email address.
Resolución
Follow these steps to input a dummy sender adress, and configure support Assist:
- Obtain current SMTP server with "uemcli /sys/support/connecthome show -detail"
- Reconfigure connecthome with a dummy --sendermail:
svc_connectemc --enable <smtp_addr> --sendermail test@test.com
- Configure Support Assist with SCG
Productos afectados
Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600FProductos
Dell Unity 300, Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F
, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell EMC UnityVSA Professional Edition/Unity Cloud Edition
...
Propiedades del artículo
Número del artículo: 000215107
Tipo de artículo: Solution
Última modificación: 29 ago 2023
Versión: 3
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.