vProxy: Fehlgeschlagene Backups – "Block Reader konnte nicht initialisiert werden. Fehler beim Open-Source-VMDK"
Resumen: Die NVP-Integration (NetWorker VMware Protection) wird mit der vProxy-Appliance konfiguriert. Beim Durchführen eines Backups ist der vProxy nicht in der Lage, die Quell-VMDK der VM im Hot-Add-Transportmodus zu öffnen. Dies wirkt sich nur auf einige VMs aus, aber es sind bei jeder Ausführung des Workflows konsistent dieselben VMs. Es gibt einen Snapshot der zu sichernden VM aus einem früheren Backup, der noch mit der vProxy-VM verbunden ist. Am Ende eines vorherigen Backups wurden die VM-Snapshots nicht ordnungsgemäß konsolidiert, sodass der Snapshot auf dem vProxy gemountet blieb. ...
Este artículo se aplica a
Este artículo no se aplica a
Este artículo no está vinculado a ningún producto específico.
No se identifican todas las versiones del producto en este artículo.
Síntomas
Die NVP-Integration (NetWorker VMware Protection) wird mit der vProxy-Appliance konfiguriert. Beim Durchführen eines Backups ist der vProxy nicht in der Lage, die Quell-VMDK der VM im Hot-Add-Transportmodus zu öffnen. Dies wirkt sich nur auf einige VMs aus, aber es sind bei jeder Ausführung des Workflows konsistent dieselben VMs.
YYYY-MM-DDTHH:MM:SS NOTICE: VDDK INFO YYYY-MM-DDTHH:MM:SS error -[7F251DE08740] [Originator@6876 sub=transport] Cannot use mode hotadd to access [Datastore01] 600009700BCBB96A33AD006E000000A6/VM_Server01-000001.vmdk: Cannot mount using this method. (Mounting VM vm-8629 using transport hotadd failed : Failed to hot-add SCSI targets: Vmomi::MethodFault::Exception: vim.fault.GenericVmConfigFault.)
YYYY-MM-DDTHH:MM:SS NOTICE: VDDK INFO VixDiskLib: Unable to locate appropriate transport mode to open disk. Error 13 (You do not have access rights to this file) (Mounting VM vm-123 using transport hotadd failed : Failed to hot-add SCSI targets: Vmomi::MethodFault::Exception: vim.fault.GenericVmConfigFault.) at 4900.
YYYY-MM-DDTHH:MM:SS NOTICE: VDDK INFO VixDiskLib: VixDiskLib_OpenEx: Cannot open disk [Datastore01] 600009700BCBB96A33AD006E000000A6/VM_Server01-000001.vmdk. Error 13 (You do not have access rights to this file) (Mounting VM vm-123 using transport hotadd failed : Failed to hot-add SCSI targets: Vmomi::MethodFault::Exception: vim.fault.GenericVmConfigFault.) at 5021.
YYYY-MM-DDTHH:MM:SS ERROR: [@(#) Build number: 70] Data Mover: Hard disk 2: VDDK: Failed to open source VMDK "[Datastore01] 600009700BCBB96A33AD006E000000A6/VM_Server01-000001.vmdk": VDDK Error: 13: You do not have access rights to this file.
YYYY-MM-DDTHH:MM:SS ERROR: [@(#) Build number: 70] Data Mover: Hard disk 2: Failed to initialize Block Reader.
YYYY-MM-DDTHH:MM:SS NOTICE: [@(#) Build number: 70] "Description": "Failed to backup virtual disk \"Hard disk 2\". Failed to initialize Block Reader. Failed to open source VMDK \"[Datastore01] 600009700BCBB96A33AD006E000000A6/VM_Server01-000001.vmdk\": VDDK Error: 13: You do not have access rights to this file.",
YYYY-MM-DDTHH:MM:SS INFO: [@(#) Build number: 70] VM '[Datastore01] 600009700BCBB96A33AD006E000000A6/VM_Server01.vmx' not hosted on VSAN.
Causa
Es ist ein Snapshot der ausgefallenen VM vorhanden, der noch mit der vProxy-VM aus einem früheren Backup verbunden ist. Am Ende eines vorherigen Backups wurde der VM-Snapshot nicht ordnungsgemäß konsolidiert, sodass der Snapshot auf dem vProxy gemountet blieb.
Resolución
Das ProxyHC-Dienstprogramm kann verwendet werden, um zurückgelassene Festplatten oder Snapshots zu bereinigen.
NVP-vProxy: Verwendung des Integritätsprüfungstools ProxyHC auf vProxy-Appliance
Während VM-Backups sendet der vProxy eine Anforderung zur Erstellung eines Snapshot an den vCenter Server. Am Ende des Backups wird eine Anforderung zum Entfernen des Snapshots gesendet. Der vProxy protokolliert diese Anfragen in /opt/emc/vproxy/runtime/logs/vbackupd/vbackupd-snapmgr.log. Antworten auf diese Anfragen stammen von der VMware-API. Wenn Snapshots in der VMware-Umgebung nicht entfernt werden, wird empfohlen, sich an den VMware-Support zu wenden:
NVP vProxy: Troubleshooting von VMware-Snapshot-Problemen während NetWorker-Backups.
NVP-vProxy: Verwendung des Integritätsprüfungstools ProxyHC auf vProxy-Appliance
Während VM-Backups sendet der vProxy eine Anforderung zur Erstellung eines Snapshot an den vCenter Server. Am Ende des Backups wird eine Anforderung zum Entfernen des Snapshots gesendet. Der vProxy protokolliert diese Anfragen in /opt/emc/vproxy/runtime/logs/vbackupd/vbackupd-snapmgr.log. Antworten auf diese Anfragen stammen von der VMware-API. Wenn Snapshots in der VMware-Umgebung nicht entfernt werden, wird empfohlen, sich an den VMware-Support zu wenden:
NVP vProxy: Troubleshooting von VMware-Snapshot-Problemen während NetWorker-Backups.
Productos afectados
NetWorkerProductos
NetWorkerPropiedades del artículo
Número del artículo: 000168799
Tipo de artículo: Solution
Última modificación: 27 sept 2023
Versión: 3
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.