Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Unsupported Cisco SFP+ Module causes network performance issues

Resumen: This article addresses unsupported  Cisco SPF+ modules when used with Broadcom network interface cards.

Es posible que este artículo se traduzca automáticamente. Si tiene comentarios sobre su calidad, háganoslo saber mediante el formulario en la parte inferior de esta página.

Contenido del artículo


Síntomas

Event ID 34 will be posted in the System event log.

Log Name: System
Source: ebdrv
Date: 11/28/2013 10:51:15 AM
Event ID: 34
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: computername.domain.com
Description:
The description for Event ID 34 from source ebdrv cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
NTPNP_PCI0115
0
CISCO-OEM
SFP-H10GB-CU3M 

 

Causa

The unsupported use of a Cisco SFP+ Module SFP-H10GB-CU3M on a Broadcom 57810 NetXtreme II 10 Gigabit NIC can cause network performance issues. Intermittent iSCSI disconnections may occur.

Resolución

Replace the SFP+ module with a supported module.

Propiedades del artículo


Producto comprometido

Servers, Microsoft Windows 2008 Server R2, Microsoft Windows 2012 Server, Microsoft Windows 2012 Server R2

Fecha de la última publicación

01 sept 2022

Versión

4

Tipo de artículo

Solution