PowerPath: Hostitel se nezobrazuje v nástroji Unisphere
Resumen: Hostitel s nainstalovaným softwarem PowerPath (licencovaný prostřednictvím pole FX) a se zařízeními nakonfigurovanými na VMAX se nezobrazuje v nástroji Unisphere (není uveden v grafickém uživatelském rozhraní PMAX UnisSphere v části PowerPath Hosts)." powermt update host_registration" nebo restartování hostitele nepomáhá. ...
Este artículo se aplica a
Este artículo no se aplica a
Este artículo no está vinculado a ningún producto específico.
No se identifican todas las versiones del producto en este artículo.
Síntomas
Prostředí:
Software Dell EMC: Software PowerPath (jakákoli verze) licencovaný prostřednictvím softwaru Dell EMC array
FX: Unisphere (jakákoli verze)
Ačkoli má hostitel zařízení nakonfigurovaná z VMAX a správně spravovanou softwarem PowrePath, nezobrazuje se v grafickém uživatelském rozhraní Unisphere v části PowerPath Hosts.
Causa
Možnost PowerPath misconfiguration
Checking "powermt display options", vidíme:
Storage
System Class Attributes
------------ ----------
Symmetrix periodic autorestore = on
reactive autorestore = on
status = managed
proximity based autostandby = on
proximity based autostandby threshold = default
auto host registration = disabled
autopath mask counter = enabled
autopath array controlled counter = enabled
device to array performance report = enabled
device in use to array report = enabled device in use to array report = enabled
Checking "powermt display options", vidíme:
Storage
System Class Attributes
------------ ----------
Symmetrix periodic autorestore = on
reactive autorestore = on
status = managed
proximity based autostandby = on
proximity based autostandby threshold = default
auto host registration = disabled
autopath mask counter = enabled
autopath array controlled counter = enabled
device to array performance report = enabled
device in use to array report = enabled device in use to array report = enabled
Resolución
Chcete-li získat hostitele automaticky registrovaný v unisphere, povolte "automatickou registraci hostitele".
Problém řeší následující příkazy:
# powermt set auto_host_registration=on class=symm
# powermt save
# powermt update host_registration
Změna je po restartování trvalá.
Problém řeší následující příkazy:
# powermt set auto_host_registration=on class=symm
# powermt save
# powermt update host_registration
Změna je po restartování trvalá.
Productos afectados
Unisphere for VMAX, Unisphere for PowerMaxProductos
PowerPathPropiedades del artículo
Número del artículo: 000214558
Tipo de artículo: Solution
Última modificación: 03 jul. 2024
Versión: 4
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.