How to Save and Restore Library configuration and Restore Factory Defaults on a TL2000 or TL4000

Résumé: Here you can find the description how to Save and/or Restore the Library configuration and the Restore Factory Defaults on a TL2000 or TL4000.

Cet article concerne Cet article ne concerne pas Cet article n’est associé à aucun produit spécifique. Toutes les versions du produit ne sont pas identifiées dans cet article.
Consulter d’autres ressources

Instructions

To
Save the Library Configuration.
Go to Save/Restore under the Configure Library section. 
Click Save at the Save Configuration to File.
SaveLibconfig1.png

The Download is provided using the Browser.
SaveLibconfig2.png

The *.dbb File is located in your Downloads folder from your management system. 
SaveLibconfig3.png


To
Restore the Library Configuration.
Go to Save/Restore under the Configure Library section. 
Click Browse… at the Restore Configuration from File.
RestLibconfig1.png

Select the configuration file (*.dbb) from your management system.
RestLibconfig2.png

Click Restore at the Restore Configuration from File.
RestLibconfig3.png

Be aware: If you load a configuration from another Library, the ServiceTag is overwritten too, and it should be corrected afterwards. A description how to do that you can find here: How to change the ServiceTag of a PowerVault TL2000 or TL4000.


To
Restore Factory Defaults
Go to Save/Restore under the Configure Library section. 
Click Restore at the Restore Factory Defaults.
LibconfigDefault1.png

Confirm the prompt on the screen with OK.
LibconfigDefault2.png

Produits concernés

PowerVault TL2000, PowerVault TL4000
Propriétés de l’article
Numéro d’article: 000205962
Type d’article: How To
Dernière modification: 27 Mar 2023
Version:  3
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.