NetWorker VMware Protection-vProxy: How to Manually Upgrade or Redeploy vProxy
Résumé: The NetWorker VMware Protection (NVP) integration is configured with the vProxy appliance. This article focuses on the process that is required for manually replacing or upgrading the vProxy appliance. ...
Cet article concerne
Cet article ne concerne pas
Cet article n’est associé à aucun produit spécifique.
Toutes les versions du produit ne sont pas identifiées dans cet article.
Instructions
NOTE: vProxy upgrades can be automated using the NetWorker Web User Interface (NWUI) or
nsrvproxy_mgmt command as detailed in: NVP vProxy: How To Upgrade the NVP vProxy Appliance
To manually redeploy the vProxy appliance, perform the following steps:
- Gather the following information about the vProxy appliance:
- IP address
- Domain Name System (DNS) servers' IP addresses
- DNS suffix
- Default Gateway
- Netmask
- VLAN
- Datastore
- Location in vCenter
- Any custom
/etc/hostsor/etc/resolv.conffile modifications
- Delete the vProxy appliance from NMC, as described in the Deleting the vProxy host section of the NetWorker VMware Integration Guide.
- Log in to the vCenter server by using the vSphere Client and remove the vProxy virtual machine (VM) from the vCenter by powering off the VM and then deleting the vProxy.
- Deploy the new vProxy appliance and configure the network settings, as described in the Deploy the vProxy appliance section of the NetWorker VMware Integration Guide.
- Add back any custom
/etc/hostsor/etc/resolv.conffile modifications. - Add the newly deployed vProxy appliance to the NetWorker server and configure the appliance, as described in the Configuring the vProxy in NetWorker section of the NetWorker VMware Integration Guide.
- After vProxy appliance registration completes, verify that a valid certificate appears in the NMC vProxy Properties.
Informations supplémentaires
- NVP vProxy: NetWorker vProxy Version Information
- NVP-vProxy: How to update or change vProxy admin or root password
- NVP vProxy: How to manually change the vProxy Appliance network interface settings
- NVP vProxy: How To Unregister/Re-Register a vProxy Appliance?
- The NetWorker VMware Integration Guide also contains information about vProxy deployment and upgrades; this guide is available through the Dell Support NetWorker Product Page.
Produits concernés
NetWorkerProduits
NetWorkerPropriétés de l’article
Numéro d’article: 000022608
Type d’article: How To
Dernière modification: 14 May 2025
Version: 9
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.