Avamar: GC Failing with MSG_ERR_NOTAVAILABLE

요약: Avamar Garbage Collection (GC) fails with the error "MSG_ERR_NOTAVAILABLE" due to stale sessions left from a node replacement or restart.

이 문서는 다음에 적용됩니다. 이 문서는 다음에 적용되지 않습니다. 이 문서는 특정 제품과 관련이 없습니다. 모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.

증상

Avamar GC starts and then rapidly fails with MSG_ERR_NOTAVAILABLE.

 

원인

Stale sessions were left from a node replacement or restart.
These stale backup, replication, or recovery sessions can cause Avamar GC to fail with MSG_ERR_NOTAVAILABLE.

Note that the "status.dpn" output shows 22 dispatchers (Dis column).

Note: 1-3 dispatchers on an idle system is normal.
admin@avamar:~/>: status.dpn:
Node   IP Address   Version             State   Runlevel  Srvr+Root+User   Dis      Suspend Load UsedMB   Errlen  %Full   Percent Full and Stripe Status by Disk
0.7   192.168.255.9 7.5.1-101_HF310405  ONLINE fullaccess mhpu+0hpu+0hpu   4 false   0.15 31582 34980635   5.4%   5%(onl:3098)  5%(onl:3076)  5%(onl:2980)
0.6   192.168.255.8 7.5.1-101_HF310405  ONLINE fullaccess mhpu+0hpu+0hpu   0 false   0.12 31583 24206783   5.4%   5%(onl:3055)  5%(onl:3021)  5%(onl:3074)
0.5   192.168.255.7 7.5.1-101_HF310405  ONLINE fullaccess mhpu+0hpu+0hpu   5 false   0.05 31578 32931941   5.4%   5%(onl:3018)  5%(onl:3051)  5%(onl:3059)
0.4   192.168.255.6 7.5.1-101_HF310405  ONLINE fullaccess mhpu+0hpu+0hpu   2 false   0.35 31590 30437344   5.2%   5%(onl:2983)  5%(onl:3033)  5%(onl:3035)
0.3   192.168.255.5 7.5.1-101_HF310405  ONLINE fullaccess mhpu+0hpu+0hpu   0 false   0.18 31574 14831616   5.4%   5%(onl:3102)  5%(onl:2994)  5%(onl:3043)
0.2   192.168.255.4 7.5.1-101_HF310405  ONLINE fullaccess mhpu+0hpu+0hpu   0 false   0.46 31575 13085565   5.2%   5%(onl:3014)  5%(onl:3033)  5%(onl:3024)
0.1   192.168.255.3 7.5.1-101_HF310405  ONLINE fullaccess mhpu+0hpu+0hpu   5 false   0.11 31581 36028694   5.3%   5%(onl:3046)  5%(onl:3055)  5%(onl:2990)
0.0   192.168.255.2 7.5.1-101_HF310405  ONLINE fullaccess mhpu+0hpu+0hpu   6 false   0.04 31585 34078136   5.3%   5%(onl:3029)  5%(onl:3063)  5%(onl:3028)

Confirm that there are no active backup or replication sessions with the "mccli" and "avmaint" commands

admin@avamar:~/>: mccli activity show --active
0,23000,CLI command completed successfully.
ID Status Error Code Start Time Elapsed End Time Type Progress Bytes New Bytes Client Domain
-- ------ ---------- ---------- ------- -------- ---- -------------- --------- ------ ------
admin@avamar:~/>:

admin@avamar:~/>: avmaint sess | grep path
admin@avamar:~/>:

 

해결

This particular issue started when a node was rebooted due to ping-no-ssh situation.
Multiple dispatchers show in the "status.dpn" output, but no corresponding activities are shown by "avmaint sess" or "mccli activity show."
Avamar GC performs a check at startup. The stale sessions interferes with this check.
Confirm with the backup team that it is acceptable to terminate all sessions. Stop the sessions through the GUI or command line.
Once all sessions have been terminated, use the following commands to recycle the maint and restart GC.
dpnctl stop maint
dpnctl start maint

GC should then start a new attempt and process successfully.

 

해당 제품

Avamar

제품

Avamar, Avamar Server
문서 속성
문서 번호: 000057377
문서 유형: Solution
마지막 수정 시간: 28 7월 2026
버전:  6
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.