How to Perform a Battery Calibration Cycle on a Dell Laptop

요약: This process can help resolve problems where the laptop battery discharges quickly or the battery percentage drops suddenly (example: 20% charge to 6% in a short timeframe.)

이 문서는 다음에 적용됩니다. 이 문서는 다음에 적용되지 않습니다. 이 문서는 특정 제품과 관련이 없습니다. 모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
기타 리소스 확인

지침

Before You Begin

Before proceeding with these advanced steps, ensure that you have already completed the foundational steps on the Dell Battery Support library page, including:

  • Checking battery health in Dell SupportAssist
  • Running Dell hardware diagnostics (ePSA / SupportAssist Pre-Boot)
  • Updating BIOS, chipset drivers, and power management drivers
  • Reviewing basic Windows power settings
  • Applying standard battery care and optimization practices

Battery Calibration Cycle

NOTE: This process may take several hours.
NOTE: It is recommended to perform up to three battery calibration cycles to ensure that the laptop’s battery has been fully calibrated.
  1. Starting with the computer off.
  2. Press the Power button on the computer and immediately start pressing the F2 key once a second to access the BIOS Setup.
  3. Navigate to Power Management > Battery Charge Configuration.
  4. Ensure the BIOS Battery Charge Configuration is set to Standard.
  5. Save any changes and exit BIOS.
  6. Start by plugging in the laptop’s AC Adapter to the wall outlet and the laptop. Ensure that the laptop has begun charging once the AC adapter is plugged in (The battery charge light located next to the charging port lights up).
    AC Adapter Plugged Into a Dell Laptop
    Figure 1: AC Adapter Connected to the Computer
    NOTE: Ensure to use the AC Adapter that came with your computer.
  7. Charge the battery to 100% with the laptop powered off or in sleep (Wait for the battery charge light next to the charging port to turn off).
  8. Disconnect the AC adapter.
  9. Use the laptop normally until it reaches critical battery level and the system shuts down or hibernates automatically.
  10. Without powering on, reconnect the AC adapter and charge back to 100% uninterrupted (Wait for the battery charge light next to the charging port to turn off).
  11. Once the laptop has been charged up to 100%, this completes one battery calibration cycle.
  12. Power on and check if the charge indicator now updates correctly.

For more information about Dell battery usage and troubleshooting, see these Dell Knowledge Base articles:

How to perform a battery calibration cycle on a dell laptop

Duration: 00:53
Closed captions: This video is available in multiple languages. Click the Closed Caption icon and select the language that you want.

Back to Top

해당 제품

G Series, Alienware, Dell Laptops, Dell Plus, Dell Pro, Dell Pro Max, Dell Pro Plus, Dell Pro Premium, Inspiron, Latitude, Dell Pro Rugged, Vostro, XPS, Legacy Laptop Models, Mobile Workstations, Dell Pro Max 16 XE MC16250
문서 속성
문서 번호: 000205559
문서 유형: How To
마지막 수정 시간: 01 9월 2026
버전:  11
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.