Dell Automation: NativeEdge Virtual Machine memory oversubscription
요약: This article describes a deployment scenario that has been observed to cause memory oversubscription on a NativeEdge Virtual Machine (VM). Memory oversubscription may result in loss of access to the affected VMs. ...
이 문서는 다음에 적용됩니다.
이 문서는 다음에 적용되지 않습니다.
이 문서는 특정 제품과 관련이 없습니다.
모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
증상
During a multi-VM deployment on a single endpoint of NativeEdge an oversubscription of resources may occur.
In the example below, a PowerEdge R760 with 128 GB of memory was used to deploy three VMs whose combined memory allocation totalled 144 GB.
Within the Automation Platform UI, all three VMs are reported as Running.
Automation Platform Alerts will contain warnings for VM memory resources being exceeded.
Attempting to open a VM console to one of the affected VMs results in the message:
‘failed to connect to server’
원인
When deploying NativeEdge VMs in Dell Automation Platform, the system validates the resources consumed by an endpoint, including, but not limited to, memory usage. This validation is intentionally designed to allow multiple VMs to be deployed, provided that resource constraints are respected at the moment each VM is powered on.
해결
To recover from this condition, uninstall any VMs or deployments that cause the ECE endpoint to exceed its available resource capacity. A future version of Automation Platform will include enhanced verification to prevent these rare VM oversubscription scenarios from occurring.
Please refer to Dell NativeEdge: Guidelines for System Memory and CPU Reservations on a NativeEdge Endpoint for endpoint overhead considerations.
해당 제품
Dell Automation Platform, NativeEdge Solutions, Dell Automation Platform Components, NativeEdge문서 속성
문서 번호: 000435738
문서 유형: Solution
마지막 수정 시간: 16 3월 2026
버전: 1
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.