Data Domain: Understanding Disk Reconstruction

Samenvatting: This article provides an understanding of the Data Domain Disk Reconstruction process.

Dit artikel is van toepassing op Dit artikel is niet van toepassing op Dit artikel is niet gebonden aan een specifiek product. Niet alle productversies worden in dit artikel vermeld.

Instructies

PURPOSE

Provide an understanding of the Data Domain (DD) Disk Reconstruction process.

APPLIES TO

  • All Data Domain systems
  • All Data Domain Operation Systems (DDOS) Releases

Data Domain systems use RAID 6 to ensure robust protection of customer data, even if there are multiple disk failures. Monitoring disk reconstruction status is essential when a disk fails. 

  • RAID 6 Protection: Supports multiple simultaneous disk failures without data loss (RAID 6 has double parity protection per disk group).

  • Reconstruction Rules:

    • A maximum of two disk reconstructions can occur simultaneously (across two disk groups).
    • Exception: If two disks fail within the same Disk Group (DG), only one reconstruction can proceed at a time. The second will begin only after the first completes.
  • Global Sparing Behavior:

    • Data Domain uses global spares across all external enclosures.
    • If all spares in one enclosure are consumed and not replaced, the system pulls a spare from another enclosure with the matching disk size.
    • This may result in a Disk Group spanning multiple enclosures. While it is ideal to keep RAID and spare disks within the same enclosure, this configuration does not impact performance.
  • Reconfiguration Guidance:

    • If global sparing has occurred, contact support to verify system health and assist with disk enclosure reconfiguration.
  • Controller Disk Behavior:

    • Head Unit (Controller) disks do not reconstruct to external shelf spare disks.
  • Best Practice:

    • Replace failed disks as soon as possible to maintain optimal protection and system stability.

Viewing Disk Reconstruction Status on Data Domain

To monitor disk reconstruction progress on a Data Domain system, use the following DD-CLI command:

# disk show state
OR
# storage show all

Command Output Includes:

    • Current disk state
    • Reconstruction activity
    • Disk group undergoing reconstruction
    • Percent completion of reconstruction

Special Case:

If a second disk failure occurs in the same disk group (for example, dg1 or dg2), the output indicates a reconstruction pending status. This means that the second reconstruction will not begin until the first has been completed.

For Example: 
sysadmin@hostname# disk show state
Enclosure   Disk
            1  2  3  4  5  6  7  8  9  10 11 12 13 14 15
---------   ---------------------------------------------
1           s  .  .  .
2           .  .  R  .  .  .  .  .  .  .  .  .  .  .  F
3           F  .  .  .  .  .  .  .  .  .  .  .  .  .  R
4           .  s  .  F  .  .  .  .  .  .  .  .  .  .  .
---------   ---------------------------------------------

Legend       State                          Count
------       ----------------------------   -----
.            In Use Disks                   44
s            Spare Disks                    1
R            Spare (reconstructing) Disks   2
F            Failed Disks                   3
------       ----------------------------   -----
Total 49 disks

Disk      Disks                        Progress   Remaining
Group   Reconstructing                 (%)        (minutes)
-----       --------------            --------    ---------
dg1           2.3                      0             238
dg2           3.15                    99             10
dg3        (Pending)
-----       --------------            --------    ---------

Extra informatie

 

Getroffen producten

Data Domain

Producten

Data Domain, Data Domain
Artikeleigenschappen
Artikelnummer: 000011134
Artikeltype: How To
Laatst aangepast: 26 sep. 2025
Versie:  7
Vind antwoorden op uw vragen via andere Dell gebruikers
Support Services
Controleer of uw apparaat wordt gedekt door Support Services.